warriorhoneybee Posted February 17, 2012 Share #1 Posted February 17, 2012 here's another question,has anyone used this type of clutck kit, and if so how was it?http://www.baronscustom.com/catalog/display/554/index.html Link to comment Share on other sites More sharing options...
Rick Haywood Posted February 17, 2012 Share #2 Posted February 17, 2012 Yes I have that one in mine and I like it. It is a little stiffer on the pull. Now sit back and wait for it:stickpoke: Link to comment Share on other sites More sharing options...
warriorhoneybee Posted February 17, 2012 Author Share #3 Posted February 17, 2012 thanks rick,mine is all right just seems to me a little weak.just like the rider. looking to maybe upgrade in the fall or winter and was just wondering which way to go.i know i've heard the barret upgrade is good, just wondering which is the best route. Link to comment Share on other sites More sharing options...
Cougar Posted February 17, 2012 Share #4 Posted February 17, 2012 This is all you need :-) http://www.venturerider.org/classifieds/showproduct.php?product=3763&title=second-genheavy-duty-clutch-spring-upgrade-kit-21&cat=22 Link to comment Share on other sites More sharing options...
warriorhoneybee Posted February 17, 2012 Author Share #5 Posted February 17, 2012 thanks for the info cougar,just trying to think outside the box and see if there be any newer design or tec. thanks again. any other info would be nice. and i did a search also. Link to comment Share on other sites More sharing options...
Rick Haywood Posted February 17, 2012 Share #6 Posted February 17, 2012 Mark I meant to let you know that you/I can get that upgrade for less then they are showing on the webpage. I believe I paid $110 Link to comment Share on other sites More sharing options...
warriorhoneybee Posted February 17, 2012 Author Share #7 Posted February 17, 2012 thanks rick Link to comment Share on other sites More sharing options...
muaymendez1 Posted February 17, 2012 Share #8 Posted February 17, 2012 I just bought my second kit from skydoc_17 first kit went into a friends bike.He calls me a genius because I took full credit for the upgrade.......yeah I know, its shamefull but hes not a computer person and will never meet skydoc_17. He raves about it sup much in fact that I just purchased one for my bike.Will bed going on tommorow.Directions are spot on and Earl is always willing to answer my questions or just chat for a few. My clutch slipped about 3 times in 5 months but usually when in last gear and hammering the throttle. Just as my buddy this will stop shortly. Thr stuff pull is just too easy to pick on so ill leave that one alone Link to comment Share on other sites More sharing options...
warriorhoneybee Posted February 17, 2012 Author Share #9 Posted February 17, 2012 good luck on yours.are you just doing the srpings or springs and disc?( friction disc) Link to comment Share on other sites More sharing options...
Yammer Dan Posted February 17, 2012 Share #10 Posted February 17, 2012 good luck on yours.are you just doing the srpings or springs and disc?( friction disc) Never seen the friction disks wear out. They just loose tension in the springs. But even with springs they won't :whistling:outrun a 1st Gen!! Link to comment Share on other sites More sharing options...
djh3 Posted February 17, 2012 Share #11 Posted February 17, 2012 Do they (yamaha) call it something different? What I saw in the link Cougar had was a metal friction plate and (thicker) and a thicker friction disc. Is the two pieces being thicker what causes it to have more clamp power? I didnt see any "spring" in the pictures he had posted. Link to comment Share on other sites More sharing options...
Cougar Posted February 17, 2012 Share #12 Posted February 17, 2012 Yes, and is is thicker... read his artical a little more this is all you need to have the clutch stronger. works great 2 hour job your first time if that. Jeff Link to comment Share on other sites More sharing options...
muaymendez1 Posted February 17, 2012 Share #13 Posted February 17, 2012 What we call a spring is a pressure plate unlike barons where you have coil springs. This is a plate Link to comment Share on other sites More sharing options...
djh3 Posted February 17, 2012 Share #14 Posted February 17, 2012 OK sorry guess I missed a link to an article. All I saw was the link for barrons parts and then the link for the thicker parts deal. Guess I'll go check out the parts diagram to see how it all works. I thought it was a spring and diaphram set up. Link to comment Share on other sites More sharing options...
muaymendez1 Posted February 17, 2012 Share #15 Posted February 17, 2012 Im telling you I have purchased. If you go under clasified, member vender and look at skydoc_17 he has a picture of what it looks like Link to comment Share on other sites More sharing options...
Cougar Posted February 17, 2012 Share #16 Posted February 17, 2012 This is all you need :-) LOL http://www.venturerider.org/classifi...-kit-21&cat=22 Link to comment Share on other sites More sharing options...
Rick Haywood Posted February 17, 2012 Share #17 Posted February 17, 2012 Do they (yamaha) call it something different? What I saw in the link Cougar had was a metal friction plate and (thicker) and a thicker friction disc. Is the two pieces being thicker what causes it to have more clamp power? I didnt see any "spring" in the pictures he had posted. it doesn't look like a spring because it is a diaphram spring Link to comment Share on other sites More sharing options...
Gray Ghost Posted February 18, 2012 Share #18 Posted February 18, 2012 The setup from skydoc gives you a full size friction disc to replace the half size one, giving you more grab area, and the thicker diaphragm spring increases the pressure. When I replaced mine I could tell the difference in how the clutch operated. It was a slightly harder pull, but was not enough to be uncomfortable. Link to comment Share on other sites More sharing options...
djh3 Posted February 18, 2012 Share #19 Posted February 18, 2012 Thats one thing I would like to be able to "bring over" from my Kawai. The clutch on that one had an adjustment of where the throw was. With this bike it is uncomfortable for me. Its hard to explain. I allways have had my finger closest to my thumb around the grip and then pull the clutch with the other three. I find it hard to do on this hyd set up. I'm trying to learn though. So with the disk being thicker really all we are doing is reducing the distance between the disks so it "fakes" out the spring tension sort of. Kind of like what we use to do on the old posi-track rearends. We added shims under the springs to tighten them up. that way they grabbed harder, then you started breaking axles and wheels. So then you beffed up........... Link to comment Share on other sites More sharing options...
Santa Hal Posted February 18, 2012 Share #20 Posted February 18, 2012 I just bought my kit from skydoc_17 :cool10:Hal Link to comment Share on other sites More sharing options...
Kirby Posted February 18, 2012 Share #21 Posted February 18, 2012 There is one other thing you might want to consider. I just added another stock diaphragm spring to the clutch. It takes some getting use to, but the clutch won't slip anymore. I did this about a month ago and now I hardly notice it anymore. Skydoc17 told me I'd be able to crack walnuts with my left hand in a few weeks and I think he was right. :dancefool::dancefool: Link to comment Share on other sites More sharing options...
warriorhoneybee Posted February 18, 2012 Author Share #22 Posted February 18, 2012 wow,thats what i'm talking about. what about the clutch basket?seems like i've heard something about this. i thought all it did was hold all the parts.please explain. Link to comment Share on other sites More sharing options...
djh3 Posted February 18, 2012 Share #23 Posted February 18, 2012 I think somewhere in the hundred or so posts I've read about clutch "whine" changing the basket fixs the whine for some but not all. I dont know when in the basket would stop it. Looks like the basket for the most part is "suspended" by the clutches and steels. Beats me. Link to comment Share on other sites More sharing options...
Yammer Dan Posted February 18, 2012 Share #24 Posted February 18, 2012 Some baskets Chirp some don't. 1st Gens Don't chirp they just go..... It is the chirp thing. If your 2nd Gen has the chirp you might change baskets and get rid of it. Or you could just turn the radio up. Link to comment Share on other sites More sharing options...
Gray Ghost Posted February 18, 2012 Share #25 Posted February 18, 2012 So with the disk being thicker really all we are doing is reducing the distance between the disks so it "fakes" out the spring tension sort of............[/quote The diaphragm spring in skydoc's kit is thicker than stock. It is actually increasing spring tension. The supplied friction disc is supplying more overall surface area, not thickness. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now