lshafer Posted February 5, 2012 #1 Posted February 5, 2012 Does anyone have some pictures of the Barons tachometer mounted on the master cylinder cover of their bike? I'm going to be purchasing a tach and wanted to see what this set up looks like prior to purchasing. Also, what are you thoughts on it? Does it do everything you want it to? Does it look nice? Was the installation easy? Thoughts please? Thanks, Les
54chevybelair Posted February 5, 2012 #2 Posted February 5, 2012 I'm very happy with my tach. It is not the cheapest option but it does look nice. Installation was very easy and if you purchase both the tach and master cylinder cover you will have everything you need.
Freebird Posted February 5, 2012 #3 Posted February 5, 2012 I've got the same one on my bike. I really like the way it looks and it has worked very well.
lshafer Posted February 5, 2012 Author #4 Posted February 5, 2012 Is there any adjustment left to right or up and down with this set up. I know you can turn the face to make it vertical with the unit but what about adjusting the overall position?
54chevybelair Posted February 5, 2012 #6 Posted February 5, 2012 Is there any adjustment left to right or up and down with this set up. I know you can turn the face to make it vertical with the unit but what about adjusting the overall position? Barons did their homework on this one. I'm short at 5'6" and the angle of the tack is a couple inches above my line of sight. They most likely targeted the average size rider. The tack is very easy to quickly read but does not obstruct your view in any way.
Santa Hal Posted February 5, 2012 #7 Posted February 5, 2012 I'm very happy with my tach. It is not the cheapest option but it does look nice. Installation was very easy and if you purchase both the tach and master cylinder cover you will have everything you need. I like the way the tach looks on your bike. I also like the leather gas tank protector that looks really cool. If you could let me know where you bought the tank protector from I would appreciate it. Thanks, Hal
54chevybelair Posted February 5, 2012 #8 Posted February 5, 2012 (edited) another nice but not cheap accessory. very handy for long trips. http://www.motorsportssupercenter.com/pages/Catalog/Product/4253?categoryID=210&subCategoryID=409&catalogFilter1ID=1&catalogFilter2ID=4&catalogFilter3ID=90&catalogFilter4ID=69&catalogFilter5ID=336 Edited February 5, 2012 by 54chevybelair fix link
warriorhoneybee Posted February 5, 2012 #9 Posted February 5, 2012 tach looks good,what about the wires,how are they routed,wraped etc?
Jayceesfolly Posted February 5, 2012 #10 Posted February 5, 2012 Why do you need a tach???. Just run it up to the rev limiter and shift!!!!!!
54chevybelair Posted February 5, 2012 #11 Posted February 5, 2012 tach looks good,what about the wires,how are they routed,wraped etc? Installing this tack couldn't be easier. The wire come out of the back of the tack through a grommet. All the wires are inside a rubber/plastic jacket. There is plenty of room to run them along with the other wires and cables on the handle bars. I wired mine to the top right coil. the tack comes with all the wire connecters you need. Wiring this way the tack will only come on when the key is on and the kill switch is on. Hope this helps
Yammer Dan Posted February 6, 2012 #13 Posted February 6, 2012 thanks for the info. Yeah you want to keep track of how hard you were cranking that thing when the 1st Gen blows by you..... Oh the 1st Gen comes with a Tach!!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now