wanted 1st gen mkII brake lines

[mother]

i am looking for all the rubber brake lines for a 86 mkII. if you have upgraded to new braided lines if i could borrow your old ones and i can return them to you if you want. i have a vendor within walking distance of my house who does custom brake lines and i want to give him a try. he needs a sample set to make the new ones.

let me know if you can help or pm me.

 

thanks , Scott

[dingy]

See if this helps you any.

 

Here is a list of lines I had from my 1st gen 83

 

Should be same as MKII, except you don't need the anti dive valve hoses. And the MKII with upper burp valve is listed instead of the MKI. Don't have a picture of it though.

 

Gary

 

 

 

Rear Master to front steel line at rear master.

 

4 3/4" from face of 10mm fitting to C/L of banjo fitting

 

Banjo @ 15 deg.

 

 

Front metering valve. (This line is from a 1988 bike with the upper bleeder port)

 

8 5/16" from face of 10mm fitting at top bleeder to C/L of double banjo fitting

 

33 3/4" from C/L of double banjo fitting to C/L of banjo fitting at brake caliper.

 

Bottom banjo fitting 15 deg.

 

 

Front master to brake caliper

 

44 1/4" C/L to C/L

 

Top fitting 45 deg.

 

Bottom fitting 15 deg.

 

Two banjo fittings are in line with a combined angle of 60 deg.

 

 

Anti dive valve

 

11 1/2" C/L to C/L of banjo fittings.

 

 

Top clutch line

 

22 1/2" C/L banjo fitting to face of 10 mm fitting

 

Banjo fitting 15 deg.

 

 

Lower Clutch line

 

8 1/2" C/L banjo fitting to face of 10 mm fitting