M61A1MECH Posted December 23, 2011 #1 Posted December 23, 2011 Check this out. http://www.wimp.com/buildit/
Freebird Posted December 23, 2011 #2 Posted December 23, 2011 It's all BS. I bought one of those off Ebay 2 years ago. It doesn't work and to this day they still haven't figured out the issue with the reverse flux comogulator.
bongobobny Posted December 23, 2011 #3 Posted December 23, 2011 You might have a defective dingle arm or it is malaligned with the conframamator Don...
etcswjoe Posted December 23, 2011 #4 Posted December 23, 2011 My problem was the superhypatubantaor plug was loose and it was low on purple fluid. I think that video was from a comedy TV show.
Yammer Dan Posted December 23, 2011 #5 Posted December 23, 2011 If not correctly installed it won't work.
alwrmcusn Posted December 23, 2011 #6 Posted December 23, 2011 ....eggactly what I've been workin' on for the past 13.4 years. Had to stop the production when Wal-Mart closed the local store and built a super center just out of my walkin' distance! Dang!!
Venturous Randy Posted December 23, 2011 #7 Posted December 23, 2011 Ya know, to a lot of guys, the way we talk about our bikes makes just about as much sense as this video. And, this may include a few on here. RandyA
Woody Posted December 23, 2011 #8 Posted December 23, 2011 Ya know, to a lot of guys, the way we talk about our bikes makes just about as much sense as this video. And, this may include a few on here. RandyA Randy, you said that cause it is true.
Panjandrum Posted December 23, 2011 #9 Posted December 23, 2011 Have I been in stasis? Is it April already??
darthandy Posted December 23, 2011 #10 Posted December 23, 2011 I think that video was from a comedy TV show. I'm sorry, but you're wrong! It was from a G.M. engineering centre that produced it shortly before they filed for bankruptcy protection. Andy
Sylvester Posted December 24, 2011 #11 Posted December 24, 2011 I assume from this information that the fram doesn't support a flux capacitor. Sad to know that the evolution of power transfer has left the f/c dead in its tracks.
Freebird Posted December 24, 2011 #12 Posted December 24, 2011 Well the good news is that due to buying it off Ebay, I don't have $750,000,000 tied up in the piece of junk. I bought it for $5.95 and that included shipping so if I end up having to just throw it away, no big deal.
1 Canuck Posted December 24, 2011 #13 Posted December 24, 2011 He's talking crap. It's much easier to put racing air in your tires. He didn't even suggest the use of aluminum magnets...what's with that?
ragtop69gs Posted December 24, 2011 #15 Posted December 24, 2011 I think that video was from a comedy TV show. A technical description of the Entabulator. Take a minute for this one. THIS IS CONSIDERED A MASTERPIECE OF [censored]. YOU WILL LOVE IT. I BELIEVE IT PRE-DATES THE FLUXCAPACATOR. Before watching the video clip, read the background below . Several years ago, Rockwell International decided to get into the heavy duty transmission business. They were getting ready to tape their first introductory video. As a warm up, the professional narrator began what has become a legend within the training industry. This man should have won an academy award for his stellar performance. Now remember this is strictly off the cuff, nothing is written down. I think you will enjoy this once in a lifetime performance from this gentleman.
bryan52577 Posted December 24, 2011 #16 Posted December 24, 2011 WHAT LANGUAGE IS THAT???? WHY CAN'T HE JUST SPEAK ENGLISH? Bryan
mgosset1 Posted December 24, 2011 #17 Posted December 24, 2011 Capacitive Directance....??....I must have been sleeping thru that segment in Athen's Don...
Freebird Posted December 24, 2011 #18 Posted December 24, 2011 THAT segment? You didn't sleep through ALL the segments?
Yammer Dan Posted December 24, 2011 #19 Posted December 24, 2011 Well the good news is that due to buying it off Ebay, I don't have $750,000,000 tied up in the piece of junk. I bought it for $5.95 and that included shipping so if I end up having to just throw it away, no big deal. GOT RID OF IT?? :duck:Man you could have hooked it to that Hot Tub on the deck. Added a little Sea-Foam and the results could have been unbelievable!!!
playboy Posted December 24, 2011 #20 Posted December 24, 2011 Dad blang high tech piece of crap just waiting for Txsturgis to put in laymen terms for me.
jjohnston Posted December 26, 2011 #21 Posted December 26, 2011 Well I read this cpl hrs ago. Seemed to be be missing somethings. Went to my lab crunched #'s and by golly I not surer it will work. I mean there was no mention of having to constantly add large cans of compression or the excessive muffler bearing wear cause by the lack of the aluminum magnets. ! Plus without something to keep the heifer shaft from jumping out of the bull pen ............. well I'm just sayin that wuzz funnie JJ
mgosset1 Posted December 27, 2011 #22 Posted December 27, 2011 Don I was usually so hung over back then..lol..but I tried listening....them were some fun times you got to admit....
tomephil Posted December 27, 2011 #23 Posted December 27, 2011 He's talking crap. It's much easier to put racing air in your tires. He didn't even suggest the use of aluminum magnets...what's with that? Racing air... I gotta remember that one!
Freebird Posted December 27, 2011 #24 Posted December 27, 2011 Don I was usually so hung over back then..lol..but I tried listening....them were some fun times you got to admit.... Are you kidding? I'm older and wiser now. I've learned to never admit NOTHING.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now