Anybody....?

[Bubbajbi]

Does anybody have these on their bike? If so would you please post some pictures? I would like to see what they look like on the bike before I buy some.

 

http://www.cruisercustomizing.com/detail.cfm?Category_ID=7&manufacturer_ID=165&product_ID=3153&model_ID=42&query=Model_42%20chrome

 

Thanks,

Bubba

[BuddyRich]

I have a used pair I bought. I test fitted them. To make them work I had go to the 4 piston calipers on the front from the 1st gens. They won't work on the RSV with out those and I also think I had remove the washers on the disc mount bolts for them to clear. I took them back off till I could rebuild the used calipers for the front.

I did not actually put any miles on the bike as I mentioned I was test fitting them.

[MAINEAC]

I have a pair of the smooth disks that I bought in a pallet load of NOS Yamaha parts at a salvage store sale. I was planning on installing them this winter.

[MAINEAC]

I have a used pair I bought. I test fitted them. To make them work I had go to the 4 piston calipers on the front from the 1st gens. They won't work on the RSV with out those and I also think I had remove the washers on the disc mount bolts for them to clear. I took them back off till I could rebuild the used calipers for the front.

I did not actually put any miles on the bike as I mentioned I was test fitting them.

 

Buddy, I think you're thinking about the chrome rotor covers..Bubba is talking about chrome Billet Wheel covers.. Acording to my 2003 Star Accessory Guide the wheel covers do fit the RSV.. BTW I scored a few sets of the rotor covers in the same lot of parts I bought.