AKRefugee Posted August 27, 2011 Share #1 Posted August 27, 2011 (edited) Fuel pump died yesterday so did a change out today. I went with the Mr. Gasket 42S model and the NAPA 3011 fuel filter. Was a very easy job and cost less than $60 total. WAY better than the $213 price I found on line. Only caveat I can give is to make sure you get the 90 degree, 45 Degree and the nipple and do not use the filter that comes with the pump. There is absolutely no way it will fit in there otherwise. Set it up like this picture I cut the line from the original pump and just connected it to the new wires just to keep it cleaned up. I also cut down the line from the filter to take the bend out and. I did not fasten down the new pump as it all tucked in fine just under the original mounting bracket. Edited August 28, 2011 by AKRefugee Link to comment Share on other sites More sharing options...
Yammer Dan Posted August 27, 2011 Share #2 Posted August 27, 2011 Sounds like it came out good... Link to comment Share on other sites More sharing options...
Trader Posted August 28, 2011 Share #3 Posted August 28, 2011 Picture of a white bike in a snowstorm???? Link to comment Share on other sites More sharing options...
eusa1 Posted August 28, 2011 Share #4 Posted August 28, 2011 I've seen this picture posted on another site somewhere ???? Link to comment Share on other sites More sharing options...
TDunc Posted August 28, 2011 Share #5 Posted August 28, 2011 Dang man, you using your good hand again on that keyboard? Link to comment Share on other sites More sharing options...
Yammer Dan Posted August 28, 2011 Share #6 Posted August 28, 2011 Got it fixed he must be out riding... Link to comment Share on other sites More sharing options...
TDunc Posted August 28, 2011 Share #7 Posted August 28, 2011 Got it fixed he must be out riding... If he is, he had better called me first... sittin here ready to go! Link to comment Share on other sites More sharing options...
warriorhoneybee Posted August 28, 2011 Share #8 Posted August 28, 2011 what picture??? i'm fixing to do mine also,i went with the napa fuel pump a little lower volume.peace out Link to comment Share on other sites More sharing options...
Yammer Dan Posted August 28, 2011 Share #9 Posted August 28, 2011 Does that mean you will have a little less fuel when chasing those 1st Gens Mark??? Link to comment Share on other sites More sharing options...
AKRefugee Posted August 28, 2011 Author Share #10 Posted August 28, 2011 There we go got it now Link to comment Share on other sites More sharing options...
Yammer Dan Posted August 28, 2011 Share #11 Posted August 28, 2011 At least you got it!!:rotfl: Link to comment Share on other sites More sharing options...
GeorgeS Posted August 28, 2011 Share #12 Posted August 28, 2011 Question: Is this fuel pump usable on a 1st Gen Bike ??? Link to comment Share on other sites More sharing options...
warriorhoneybee Posted September 1, 2011 Share #13 Posted September 1, 2011 thanks for the centerfold!! lol Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now