Exhaust Internals

[easternrider]

I was just wondering if anyone knows what the inside of the factory exhaust looks like. My 84 still has the factory exhaust on it. It has a few patches welded on it, and a few more pin holes. If feasable, I was wondering if one could cut it open, and put a new cover on it (just to keep it looking original)..........ok, just to cheap to go buy another one. Anyone have any ideas. CBMMA

[dingy]

There ya are.

 

Gary

[Gary Klop]

my exhaust on my 87 sounds funny like there is an air leak--when I had it in for some repairs they told me there was rust in it and the part that would need to be replaced is like $650.00. Anyone else have this problem? They told me it won't hurt to run it that way.

[easternrider]

thanks dingy

[easternrider]

wondering if anyone has used, or seen this exhaust. Supposed to be for the XVZ model of 84 http://www.jcwhitney.com/chrome-plated-replacement-mufflers/p2006468.jcwx?filterid=d2526y1984j3

[Condor]

wondering if anyone has used, or seen this exhaust. Supposed to be for the XVZ model of 84 http://www.jcwhitney.com/chrome-plated-replacement-mufflers/p2006468.jcwx?filterid=d2526y1984j3

 

Wow!!! Heck of a price. Although I quickly looked it over I didn't find any reference that they would fit the 1stGen.

[GaryZ]

Wow!!! Heck of a price. Although I quickly looked it over I didn't find any reference that they would fit the 1stGen.

 

I don't think it has the "elbow" needed at the front . . .

[easternrider]

Wow!!! Heck of a price. Although I quickly looked it over I didn't find any reference that they would fit the 1stGen.

If you went to their site, and put in all the specs, that is the exhaust that comes up. There is a button to make selections, and of course the prices go up, but still farily cheap. Just not sure if the all fit, or just 1 or 2.

And as you mention GaryZ, it doesn't seem to. Not sure if straight will work

Edited August 18, 2011 by easternrider
added more

[Condor]

If you went to their site, and put in all the specs, that is the exhaust that comes up. There is a button to make selections, and of course the prices go up, but still farily cheap. Just not sure if the all fit, or just 1 or 2.

And as you mention GaryZ, it doesn't seem to. Not sure if straight will work

 

I did go to their site, and I'd need more reassurance that these will actually fit a 1stGen than a response from a site search engine... I recently bought a RAM mount for my Garmin GPS using their site search engine. Spent $40 bucks on it and it didn't work. So sometimes these sites take liberties and stretch the facts just a little. I suspect the mufflers are more a generic fit, and are not a plug and play....