Carb Cables at the carb

[talonsx2]

so I am illiterate when it comes to loading pics so I will try to explain my question.

 

Tore down the bike for 2nd gear and am putting her back together but I have come to a problem that I nees assisstance with, The cables that open and close the flaps in the carbs were replaced by me but I am unsure which cable goes in which hole on the carb cluster? The two short cables that come out of the plastic box (Where the cruise cable goes into) and then go to the top of the carb cluster into two holes that hold the cable which one goes where?

 

I have a great pic of the question but its stuck in my email..

 

Any help would be appreciated.

 

Mike:225:

[talonsx2]

here is the pic along with the cables and holes that I am refering too.. thanks

[dingy]

The cable with the adjuster nut goes to the left most carb hole (straight up & down). This is pull cable. It goes to top of wheel in junction box.

Other cable goes to angled mount more towards center of carb body. This is return cable.

Gary

[talonsx2]

:bighug:Thank you.