Bubber Posted July 8, 2011 #1 Posted July 8, 2011 Just wanted to know if there are any RSTD bars with weights out there for sale. Kregerdoodle tells me that the RSV weights won't work with the RSTD bars so I will need the whole set-up. Any body up-grade to Flanders and now has the bars for the RSTD? I may have stuff to trade if that works for you. Oh ya! 2006 Midnight 2nd Gen. Bubber PS: I be asking at some of the other forums too. Thanks much!
Solodadof2 Posted July 8, 2011 #2 Posted July 8, 2011 (edited) is must be yo lucky day butwheat! email me norr3mi@aol.com . Edited July 8, 2011 by Solodadof2 cause
Bubber Posted July 8, 2011 Author #3 Posted July 8, 2011 PM sent to Solodadof2. It is my lucky day maybe I think, kinda. :banana:
elmicko Posted July 8, 2011 #4 Posted July 8, 2011 If somebody has else has a set after Bubber gets his, let me know. Dang short arms!!
Bubber Posted July 8, 2011 Author #5 Posted July 8, 2011 Still looking for replies to see what is out there. I'll point them in your direction elmicko if I can't make a deal. Bubber
Scooter Bob Posted July 8, 2011 #6 Posted July 8, 2011 Still looking for replies to see what is out there. Bubber You can't expect to be getting that many useful replies without getting a bunch of BS first.
Bubber Posted July 8, 2011 Author #7 Posted July 8, 2011 We caught heck the last time we deviated from the suject topic and were giving each other crap. :rotf: But always good to hear from you Bob. Maybe Eagle Eye switched his out and have a set?????? Bubber
TheKid Posted July 8, 2011 #8 Posted July 8, 2011 why won't the RSV weights work with the RSTD bars? The look the exact same. Robert
Bubber Posted July 8, 2011 Author #9 Posted July 8, 2011 why won't the RSV weights work with the RSTD bars? The look the exact same. Robert Don't know. All I can tell you is that is what I was told. Maybe someone else can jump in with first hand experience.
Kregerdoodle Posted July 8, 2011 #10 Posted July 8, 2011 The RSV weights have like a 5/8in bolt made into them so that they screw onto your bars, the TD weights have a 1/4 x 3 bolt that goes through them to hold them on. why won't the RSV weights work with the RSTD bars? The look the exact same. Robert
Bubber Posted July 8, 2011 Author #12 Posted July 8, 2011 ok thank you for the insight. Robert Kregerdoodle was my source for the info also. As Johnny Carson would say " I did not know that".
Black Owl Posted July 8, 2011 #13 Posted July 8, 2011 Maybe someone else can jump in with first hand experience. I got me lotsa first hand experience... Can I jump in???
Bubber Posted July 8, 2011 Author #16 Posted July 8, 2011 OK, back to the subject of handle bars with weights. Let's keep it on track folks.
TheKid Posted July 8, 2011 #17 Posted July 8, 2011 Does any one have a set of stock RSTD weights from replacing the grips? I have an offer for stock rstd bars just dont believe the weights are included because they used them for the new bar change out.
Sylvester Posted July 8, 2011 #18 Posted July 8, 2011 You will like this on an RSV. I have had mine for a few years and will never go back. Got it from a short stature friend that needed more pull back on his RSTD. Asked him if I could buy the stock from him, but he gave it to me. Man, I love this. Just like power steering.
Solodadof2 Posted July 8, 2011 #19 Posted July 8, 2011 I have a set of RSTD Bars and End weights and have offered them to a couple different people for$125 which included shipping. I really thought this was a fair price as the bar end weights cost $144 and the dealer quoted me $129 for the bars, not to mention shipping. If this is way off base please pm if not and you want them pm me.
Phoneman1981 Posted July 9, 2011 #21 Posted July 9, 2011 Hello Everyone: If only Yamaha would install RSTD bars on the RSV's and RSV Pillow Top seats on the RSTD's. Good luck with your upgrades!!!!!...
Globewalker Posted July 9, 2011 #22 Posted July 9, 2011 True that Phoneman I believe the Vstar1300 crowd also seeks out RSTD bars for more pullback so there is some demand out there I suppose
Hulign Posted July 9, 2011 #23 Posted July 9, 2011 Can anyone take a picture of what these look like on a RSV? Frank
wes0778 Posted July 9, 2011 #24 Posted July 9, 2011 The RSV weights have like a 5/8in bolt made into them so that they screw onto your bars, the TD weights have a 1/4 x 3 bolt that goes through them to hold them on. :confused24: Drill and tap??? :whistling:
Sylvester Posted July 9, 2011 #25 Posted July 9, 2011 Can anyone take a picture of what these look like on a RSV? Frank Here are a couple.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now