Motorcycle Mike Posted July 4, 2011 #1 Posted July 4, 2011 I lost the bolt that holds the rear brake caliper bracket to the swing arm. Page F-3 of the service manual Ref #4 Part # 95024-10030-00 Discription- Bolt, Flange I'm sure I can get one at Ace if I can find the size, pitch and tpi. Thanks!
Scooter Bob Posted July 4, 2011 #2 Posted July 4, 2011 (edited) I'm sure I can get one at Ace if I can find the size, pitch and tpi. Thanks! Give me a couple minutes, looks like I can take that one out without taking the bag off. I'll check it and get right back to you. Edited July 4, 2011 by Scooter Bob
1 Canuck Posted July 4, 2011 #3 Posted July 4, 2011 You also may want to check the grade of that bolt/capscrew. Grade 5, 8, 10 or ? Just a thought.
Scooter Bob Posted July 4, 2011 #4 Posted July 4, 2011 10mm dia. 1.25 mm thread pitch. 30mm under the flange length, If you can't get a flanged bolt, I would look for 32mm and fit a washer. Happy shopping, Scooter Bob
Scooter Bob Posted July 4, 2011 #5 Posted July 4, 2011 You also may want to check the grade of that bolt/capscrew. Grade 5, 8, 10 or ? Just a thought. I don't see any grade stamp on the bolt head. Looks like it was made to be pretty. Since braking doesn't stress the bolt, except when backing up, I would think any grade you can find would be fine. Better grade might get better corrosion protection though.
.thumb.jpg.2205483fddeda4af671a7b2c5b4f4ab4.jpg)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now