Jump to content
IGNORED

Gonna have to watch this one!


Yammer Dan

Recommended Posts

  • Replies 897
  • Created
  • Last Reply

Top Posters In This Topic

Been a long time since I done this stuff. I know if if you measure a square across corner to corner when your measurements are the same it is square. Right?? If you have rectangle footer you just measure cross corner to cross corner in a x pattern on the long sides and it should come out the same to be square. Right?

Link to comment
Share on other sites

How do you make them til you can see them larger?

 

Well for me, I use my cell phone to take pictures and then use a little connector to the computer from the phone and download to a place that I call phone pics. Then when you get ready to post;

 

1. Go to top area of the post page, where the paper clip picture is. Says - Attachments.

 

2. Click on this and then click on the little blue square that says; Choose File.

 

3. Then go to the area where you put the pictures in your computer, double click on the picture you want and the picture will attach to the square Attachment area.

 

4. After you have all the pictures you want (up to ten I think) you then click on the Upload button on the bottom right corner of the Attachment area.

 

5. The pictures will then be attached to the post.

 

I hope Dingy chimes in on this, because he is better at this explaining how than me. I say this in no disrespect to you Yammer. I had to learn the same way. I think Dingy helped me out.

 

Fuzzy :thumbsup2:

Edited by FuzzyRSTD
Link to comment
Share on other sites

I remembered the 3-4-5 but have had so many numbers running thru my head I couldn't remember how to step it up. Is it 10-15-20?

 

No Yammer, all you do is double all three numbers or triple or what ever you want.

 

Double would be 6 - 8 - 10

 

Triple would be 9 - 12 - 15

 

You see ?

 

Fuzzy

Link to comment
Share on other sites

That is what I was trying to say. Opposite sides are same diagonals are 14 inches off?? Dam rubber tapelines!!!

 

 

My long opposite sides are 40' each. My short sides are 18'

My diagonals come out 43' and 44' 7" WTF??? 19 inches difference???

 

Dan,

 

This is an approximation of your slab, I can't be exact without real good angle measurements on a corner or two, but this will give you an idea where you are at with slab squareness. I assumed 40' sides were parallel to get this.

 

Couldn't get 2nd 40' side to work out with out more info. But it is close.

 

Gary

 

http://i1007.photobucket.com/albums/af193/gdingy101/Yammer.jpg

Edited by dingy
Link to comment
Share on other sites

Now tell them its facing the wrong way!!

 

Ya, me too.... :mo money:

 

These guys really doing a fine job. If you notice in the video, each one knows the next move, helping one another. They have built several of these... You can tell it by the way they work... I did not like the dirt being put on top the gravel base floor. I am sure they did not remove it before pouring the concrete. All they would have to do is turn the bobcat hole drill the opposite direction. Other than that, nice job.

Link to comment
Share on other sites

I remembered the 3-4-5 but have had so many numbers running thru my head I couldn't remember how to step it up. Is it 10-15-20?

 

Dan:

I've an idea!! Lets invite James, Gary and all others that have offered help and advice on this thread to meet at "TUDORS BISCUIT" in Clay for breakfast... followed with a ride from Clay to Birch River on CR-11 "Devils Backbone" I think. Just for a little surprise.....when we get to CR-46 we'll make a left and go about 4 miles, talk about the rest of the ride while squaring and doing "Block Work".:clap2: You know everyone will be excited after the first section of CR-11 and will really want to "Get Er Done" so the ride can be completed.... What do you think? Sure hope you didn't want to keep Devils Backbone a secret!!:backinmyday: Oh well....its not the first time that I stubbed my toe.

 

Freddie

Link to comment
Share on other sites

Dan:

I've an idea!! Lets invite James, Gary and all others that have offered help and advice on this thread to meet at "TUDORS BISCUIT" in Clay for breakfast... followed with a ride from Clay to Birch River on CR-11 "Devils Backbone" I think. Just for a little surprise.....when we get to CR-46 we'll make a left and go about 4 miles, talk about the rest of the ride while squaring and doing "Block Work".:clap2: You know everyone will be excited after the first section of CR-11 and will really want to "Get Er Done" so the ride can be completed.... What do you think? Sure hope you didn't want to keep Devils Backbone a secret!!:backinmyday: Oh well....its not the first time that I stubbed my toe.

 

Freddie

 

 

 

Let them know about the roads we got here??? We would never get any peace!!:rotfl::rotfl:

Link to comment
Share on other sites

Dan:

I've an idea!! Lets invite James, Gary and all others that have offered help and advice on this thread to meet at "TUDORS BISCUIT" in Clay for breakfast... followed with a ride from Clay to Birch River on CR-11 "Devils Backbone" I think. Just for a little surprise.....when we get to CR-46 we'll make a left and go about 4 miles, talk about the rest of the ride while squaring and doing "Block Work".:clap2: You know everyone will be excited after the first section of CR-11 and will really want to "Get Er Done" so the ride can be completed.... What do you think? Sure hope you didn't want to keep Devils Backbone a secret!!:backinmyday: Oh well....its not the first time that I stubbed my toe.

 

Freddie

 

Sounds good Freddie. You bring along a picking instrument to. We could have a good old time shin dig and garage building, instead of a barn raising, all the same. Dan could cook on the grill for dinner. He probably has a place for a few tent setups.

 

For the roads, I am sorry, but no secrete at all to me. I have been all the way north and across east and west WV and all south. Never done Devils Backbone, too many bad stories about crotch rockets running over people. I carry a gun and would not want to have to go to jail for the rest of my life for shooting someone's crotch rocket...... NOW TO LOOK UP DAN'S EXACT LOCATION ON GOOGLE EARTH. Only about two and half hours away.........

[ame=http://maps.google.com/maps?f=q&hl=en&q=Ivydale]Ivydale - Google Maps[/ame]

 

Fuzzy

Link to comment
Share on other sites

Sounds good Freddie. You bring along a picking instrument to. We could have a good old time shin dig and garage building, instead of a barn raising, all the same. Dan could cook on the grill for dinner. He probably has a place for a few tent setups.

 

For the roads, I am sorry, but no secrete at all to me.

Fuzzy

 

James thanks for clearing up the "Roads No Secret", maybe I can get out of my corner now ?

Get Skid with his Banjo..what do you think Dan ?

I kinda think James ......just might have a Plan!

Honestly....I'd rather Pick and Grin than lay blocks....anytime!!

Link to comment
Share on other sites

That is what I was trying to say. Opposite sides are same diagonals are 14 inches off?? Dam rubber tapelines!!!

 

 

My long opposite sides are 40' each. My short sides are 18'

My diagonals come out 43' and 44' 7" WTF??? 19 inches difference???

 

You need to measure again, the dimensions that you gave are mathematically impossible.

If the sides are 18', 18', 40' and 40' then the diagonals must be 43' and 44' 8.5" or 43' 1.6" and 44' 7"

 

But anyway you look at it, it is off by a lot. I do not know if that can be saved and still end up with a square garage.

 

If the new contractor has to tear it out to start over I would defiantly be looking to take the first guy to court to recoup the damages.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...