Brake light wiring problem

[Dave77459]

I was given some nice LED lights. One of the features is the ability to have them come on with a signal wire, even if off. I set them to the mode I want (e.g., flashing yellow), then turn them off. When I pull the brake lever, they come on flashing yellow, then turn off again when I release the brake.

 

Or they should. They do come on with the brakes, but they also come on with the turn signals.

 

The lights come with a red for power, off for ground. They also come with a blue for aux signal and yellow for ground. I have red to battery, black to ground. Blue to the yellow brake wire, yellow to ground.

 

Should I attach the yellow to the brake ground? Is that brown, if I remember right?

 

I don't mind the LEDs coming on with the turn signal for now, but it isn't what I intended.

 

Dave

[Dave77459]

Here's a video of the lights showing the three zones: front, rear, and center.

 

[ame=http://www.youtube.com/watch?v=w3XGhGjYQNE]YouTube - ‪Fusion lights on Roxie‬‏[/ame]

[Dave77459]

Here they are in "breathe mode" as I drive.

 

[ame=http://www.youtube.com/watch?v=TAOG9fTxBY0]YouTube - ‪Fusion lights on Roxie‬‏[/ame]

[friesman]

I like those!