Saddle_Bag Posted November 30, 2007 #1 Posted November 30, 2007 Help!! I have an 84 Standard. I was having problems with the gas gauge , It would read full and I"d drive 30 miles and I would have less than 1/2 tank. The mechanic I go to told me it was the sending unit in the tank. I pulled it out and used a new gasket to seal it up. Wrong leaked. Took it apart and tried again. Leaked. Stopped by the local shop, Yamaha #4. Leaks. Hand cut a cork material. Leaks! Any thoughts on what will seal this up???Joe
muffinman Posted November 30, 2007 #2 Posted November 30, 2007 Try coating both sides of the gasket with petrolium jelly.That is how we do aircraft fuel gaskets. Jeff
mbrood Posted November 30, 2007 #3 Posted November 30, 2007 You can also use Yamabond #4 on both sides of the gasket. It make a pliable, gas resistant seal. I also used a THIN coat on a couple carb diaphragms... worked great so far. Mike
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now