1st Gen trailer hitches ?

[BEER30]

Any interest in 1st Gen trailer hitches ? Today a welder friend of mine stopped in to drop off a seat pan from a '54 and '55 Harley Davidson Hummer for me to recover during the winter months as he is restoring . He noticed that I had a Markland trailer hitch laying around the shop (Muffinman's hitch) and he mentioned if I could gather enough interest in them , he could make them for around $100.00 each . No chrome , nor powder coating , just plain bare metal .

This welder friend of mine is one top notch welder and specializes in fabricating trailers and hitches . He is also a biker as well .

I didn't think of it till later , was to ask him to make receiver hitches out of them . But I am sure it is doable . There are several Powder coaters around in my neighborhood .I could take the hitch I have in possession to inquire the cost to have them powder coated as well .

Any interest ?

 

 

BEER30

 

[GigaWhiskey]

I have been looking into them. Found some on the internet but could never figure out the different kinds.

[E-Fishin-C]

For A $100.00 and no chrome finish:rotfl:

[Freebird]

That's a bargain. Hitchdoc sells them for $235.00 and the only chrome you can see is the bit of chrome where the ball goes. Heck...take it and have it chromed and you are still ahead of the game. Not to mention that they don't even sell one for the '83-'85.

 

OH...Hitchdoc also makes one for the Magna...it's only $258.00.

[Denden]

Just so you know, there are two types of hitches. The hitches for the '83-'85 are different than the hitches that fit the '86-'93.

[E-Fishin-C]

That's a bargain. Hitchdoc sells them for $235.00 and the only chrome you can see is the bit of chrome where the ball goes. Heck...take it and have it chromed and you are still ahead of the game. Not to mention that they don't even sell one for the '83-'85.

 

OH...Hitchdoc also makes one for the Magna...it's only $258.00.

 

You got to be kidding:doh:

[Freebird]

Nope...no kidding...

 

http://www.hitchdoc.com/price.html

 

That $100.00 looks pretty good.

[muffinman]

The hitch in question is for the Mk2 first gens.I will if interested get the one off of my 83 to the welder to make a template from.

Beer I am in for one for the 84 Ugly bike I will let you know when I will be able to get the bike down your way to let your Bud do what is needed to fab them up.

Jeff

[Richard]

Beer I am in for one for my 88 , Richard

[BEER30]

Hey Jeff ,

I did let my welder freind know that there was a a difference between the 1st Gens year models and that there shouldn't be too much of significate mods in the mounts . He mentioned that the the other should not cost anymore as far as of now .

I have the hitch on hand today to run up to a powder coater to get pricing .

If I can gther up a bulk order , we should be able to keep the pricing down .

 

BEER30

[Eck]

Gene,

Ask him if he can fab a 2nd gen hitch for me....

I'm looking for one..(cheap)...

I will need one for the Natchez Trace ride in April 08..

[Condor]

Instead of copying the Markland hitch with the flat mounting plate and permanently mounted ball, ask if he could design one with a receiver. The '91VR I'm picking up tomorrow has a receiver so it can be done. I'll take pics of it and post if anyone's interested.....

[dynodon]

I would be interested in a reciever style for my '86 Royale. Powder coated black. Let us know, and thanks for working on this.

 

Don

[BEER30]

Receiver hitches .....we are looking into as well ! Just forgot to mention .

Eck , I'll be asking about 2nd Gens as well . Being they are the favorite and best ! :rotf:

 

BEER30

[Guest HdHtr]

I have a Markland, 86-94 if someone is interested.

[Rocket]

I would be interested in a reciever style for my '86 Royale. Powder coated black. Let us know, and thanks for working on this.

 

Don

 

Interested in a receiver type for my 83 Deer Hunter, Powder coated silver.

 

[BEER30]

Well guys , strike one on one powder coater ! Took the hitch in hand to get an estimate on powder coating .....$225.00 each plus pay for the coating materials . He can blow powder up his *** ! If you know what I mean . For that price , I can get the powder coater myself and do it . But I have enough project going on right now , plus my day job .

 

I got a few more local guys to check with ,so I am not giving up just yet .

 

BEER30

[hipshot]

i SOLD a MARKLAND hitch for an '86 (MK2), to a fellow member, about a year ago.

 

 

AIN'T RECEIVED ONE RED CENT IN PAYMENT, , YET!

sold it for what i had in it. $75.00, plus shipping to new york!

oh well, you live and learn.

just jt

[RSV Angel]

ECK get in touch with Venturedad. His reciver style hitch takes about 15 min to instal and works great on the 2nd gen. Mine was around the $100.00 range since i only got the hitch. I got my ball and reciever part from Autozone for obvious reasons. Good luck.!

Craig

[83 decked out]

got an 83 with the rear light bar on it i would be interested in a 100 hitch as well please if anyone knows could i use the hitch with the lower light bar or would i have to remove it. send info about hitch pricing to me for 83 thanks been looking all summer nothing around:bighug:

[Condor]

I have a Markland I picked up from Squidly about a year ago for $65 bucks that I no longer have a need for if anyone's interested. You'll have to make the side struts out of flat stock. Supposed to fit the 83-85.

[buddy]

got an 83 with the rear light bar on it i would be interested in a 100 hitch as well please if anyone knows could i use the hitch with the lower light bar or would i have to remove it. send info about hitch pricing to me for 83 thanks been looking all summer nothing around:bighug:

 

My 83 has the rear bumper assembly as well plus a Marland hitch too, perfect fit so yes you can install a hitch on your bumper plus keep your mud flap as well as long as its a Markland hitch or a home made hitch.

 

Ebay has a Markland hitch for the 83 - 85 venture listed number # 120190094347 perfect fit for the rear bumper set up.

 

Buddy

[WilCruise]

Instead of copying the Markland hitch with the flat mounting plate and permanently mounted ball, ask if he could design one with a receiver. The '91VR I'm picking up tomorrow has a receiver so it can be done. I'll take pics of it and post if anyone's interested.....

I agree. I know some folks have had a problem with a weak point on the Markland for the early first gens (although I don't remember exactly where it was). I found an alternative (I think it was custom) but it's still a solid ball mount. I'd consider replacing it with one that has a receiver if he can go that route.

[IH Truck Guy]

Instead of copying the Markland hitch with the flat mounting plate and permanently mounted ball, ask if he could design one with a receiver. The '91VR I'm picking up tomorrow has a receiver so it can be done. I'll take pics of it and post if anyone's interested.....

 

Jack,did you get any pics of this set up?????This would be the best way to go IMHO...It would be more versatile,trailer for longer trips,storage rack for shorter rides....

[muffinman]

Beer I will give you the hitch at our meet and eat for you to get the 83 to 85s made from.But you cant keep it very long you know me I will be pulling the trailer to Jeffs in Jan.

Jeff