Aux Fairing Turn Signals

[awsmsrv]

OK. Here's what I just did today for additional turn signals. I added a 1 foot long amber LED strip right next to the fairing "eyebrows". Whadaya think?

[ATTACH]55920[/ATTACH] [ATTACH]55921[/ATTACH]

Edited April 23, 2011 by awsmsrv
Forgot to add pix. Sheesh!

[MikeWa]

Pictures would be helpful.

Mike

[dingy]

I think a picture may help with the visual aspect of this thread.

 

Gary

[Double D]

How about some pictures in the daytime.

[Guest Zak202]

Looks very nice. How did you attach them and run the wires? Did you have to drill holes?

[Marcarl]

Looks good, and I have NO PROBLEM seeing the pictures!

[etcswjoe]

I like. Are they sequential or do they come on all at once?

[awsmsrv]

  Double D said:

How about some pictures in the daytime.

I'll try to get those up in the next few days.

  Zak said:

Looks very nice. How did you attach them and run the wires? Did you have to drill holes?

They have 3M tape on the back of them &, Yes, I had to drill holes. I drilled 1/4" holes, fitted appropriately sized rubber grommets into the holes, then ran the wiring through the grommets & tapped into the turn signal wires. I also used male & female terminals to connect inside the fairing with about 2 feet of wire, so, when I split the fairing, I can just easily disconnect them & lay aside the front half of the fairing.

  etcswjoe said:

I like. Are they sequential or do they come on all at once?

They are not sequential. I do have sequentials on my mirrors. To see them click here.