Aux Fairing Turn Signals

[awsmsrv]

OK. Here's what I just did today for additional turn signals. I added a 1 foot long amber LED strip right next to the fairing "eyebrows". Whadaya think?

[ATTACH]55920[/ATTACH] [ATTACH]55921[/ATTACH]

Edited April 23, 2011 by awsmsrv
Forgot to add pix. Sheesh!

[MikeWa]

Pictures would be helpful.

Mike

[dingy]

I think a picture may help with the visual aspect of this thread.

 

Gary

[Double D]

How about some pictures in the daytime.

[Guest Zak202]

Looks very nice. How did you attach them and run the wires? Did you have to drill holes?

[Marcarl]

Looks good, and I have NO PROBLEM seeing the pictures!

[etcswjoe]

I like. Are they sequential or do they come on all at once?

[awsmsrv]

How about some pictures in the daytime.

I'll try to get those up in the next few days.

Looks very nice. How did you attach them and run the wires? Did you have to drill holes?

They have 3M tape on the back of them &, Yes, I had to drill holes. I drilled 1/4" holes, fitted appropriately sized rubber grommets into the holes, then ran the wiring through the grommets & tapped into the turn signal wires. I also used male & female terminals to connect inside the fairing with about 2 feet of wire, so, when I split the fairing, I can just easily disconnect them & lay aside the front half of the fairing.

I like. Are they sequential or do they come on all at once?

They are not sequential. I do have sequentials on my mirrors. To see them click here.