Sgt. Maj. Posted April 21, 2011 #1 Posted April 21, 2011 I'm a new member. I am going to buy the clutch up grade from Skydoc_17 for my 99 Venture. I will need someone to help me change it. I live in Hamshire, TX about 6miles from Winnie. I'm retired military and retired from my job. I sure could use the help. I bought the Venture in 03 when my tour was over in Afghanistan. All I've done is put K&N filters, tires changed the oil, and tune up by a mechanic. Dana csmbrak@aol.com
BuddyRich Posted April 21, 2011 #2 Posted April 21, 2011 Ah, You close to Houston. Those guys down there are sharp and I'm sure one of them will jump in here pretty quick. You might have to feed them though.
Steel Horse Cowboy Posted April 21, 2011 #3 Posted April 21, 2011 Dana, Welcome to the group. I'm sure there is someone near you that can offer you some assistance once they read your post, if not I'm sure there is a write up about how to change it in the tech section. Thank you for your service to this great country and the freedom (which isn't free) we still enjoy. C.R.
bongobobny Posted April 21, 2011 #4 Posted April 21, 2011 Here ya go... http://www.venturerider.org/forum/showthread.php?t=10518 Welcome aboard!! And thank you very much for serving your country with valor and welcome home!!!!!
Thom Posted April 21, 2011 #5 Posted April 21, 2011 Welcome again , great talking with you last nite , but your in trouble now http://www.venturerider.org/forum/showthread.php?p=579909#post579909 , see I told you:rotf: . Ponch answered Order a clutch upgrade from SkyDoc17 http://www.venturerider.org/classifi...-kit-21&cat=22 or PCW racing http://www.pcwracing.net/ Do it yourself using the instructions provided or from the tech forum http://www.venturerider.org/forum/sh...ad.php?t=10518 or Post when you get the kit and we/I will help you. Ponch These Guys are a great help ! but watch for Gunboat , He has this thing with a very large hammer I still cannot believe you have not had a carb tune since 2003 and you still get 38 mpg arn't these great bikes ! Too bad the 1st member you met is Bommer CPO and soon you will meet the Houston Gang _______
BoomerCPO Posted April 21, 2011 #6 Posted April 21, 2011 Too bad the 1st member you met is Bommer CPO All I can say to dat is Pffffffftttttttttttt.....and look for rowdy pygmies to be in your neighborhood soon!! Dana....Get the Clutch upgrade kit from SkyDoc....As soon as another MD is set up for East Texas I hope to see you there Brother. Boomer...who sez the elevator don't go to the top floor on dat Thom fellar.
Squidley Posted April 21, 2011 #9 Posted April 21, 2011 Dana, I posted in another thread you wrote on, come on over to my place, were in Conroe and we can get you hooked up easy. It's about 20 minutes or less of actual working time....but about 3 hours of BSing....so about 4 hours Just mapped it, about 100 miles from you to me.
Black Owl Posted April 21, 2011 #10 Posted April 21, 2011 Dana, I posted in another thread you wrote on, come on over to my place, were in Conroe and we can get you hooked up easy. It's about 20 minutes or less of actual working time....but about 3 hours of BSing....so about 4 hours Just mapped it, about 100 miles from you to me. Boy, if this ain't an invitation to trouble. And not even anwarning advisory posted. :rotfl:Next thing Dana will know, there will be signatures all over his seat....
Thom Posted April 21, 2011 #11 Posted April 21, 2011 Boy, if this ain't an invitation to trouble. And not even anwarning advisory posted. :rotfl:Next thing Dana will know, there will be signatures all over his seat.... Yep , your rite ! I hope Dana reads Sqiud's sig.
BoomerCPO Posted April 21, 2011 #12 Posted April 21, 2011 Dana, I posted in another thread you wrote on, come on over to my place, were in Conroe and we can get you hooked up easy. It's about 20 minutes or less of actual working time....but about 3 hours of BSing....so about 4 hours Just mapped it, about 100 miles from you to me. The trip is well worth it just for the friendship and a hunk of Lonna's cheesecake! Boomer....who sez the pygmies are all riled up now that I mentioned cheesecake. Note to Dana: Keep yer eyes wide open if ya cruise through Liberty,Texas....there's a hot gal driving a yellar Miata dat cruises around dat area....and she is worth chasing!!!
BradT Posted April 22, 2011 #13 Posted April 22, 2011 Liberty,Texas....there's a hot gal driving a yellar Miata dat cruises around dat area....and she is worth chasing!!! That was the one you couldn't catch, and too old to remember what to do, Right ? Brad
BEER30 Posted April 22, 2011 #14 Posted April 22, 2011 That was the one you couldn't catch, and too old to remember what to do, Right ? Brad That's why he has the Pygmies.....to old to.........but watch! BEER30
hipshot Posted April 22, 2011 #15 Posted April 22, 2011 Dana, welcome to the "house". if ya get on over to Conroe,(with a few cupcakes) you can have that Squidly cat,eatin out of your hand!!!!! Shoot, him and Ponch, and Gunboat, will work for dairy queen treats! lol just jt
Mariner Fan Posted April 22, 2011 #16 Posted April 22, 2011 That's why he has the Pygmies.....to old to.........but watch! BEER30 :crackup:....
Sgt. Maj. Posted April 22, 2011 Author #17 Posted April 22, 2011 Well, Tom was right you guys are out there. I was losing hope on this clutch. I payed about 280 for oil change and a new clutch. and it still slipped. I was hating to bring it to the dealer. Thanks for all the replys, as soon as it comes in I'll post If I can remember how to move on this site. Thanks again Dana
bongobobny Posted April 22, 2011 #18 Posted April 22, 2011 Dana, welcome to the "house". if ya get on over to Conroe,(with a few cupcakes) you can have that Squidly cat,eatin out of your hand!!!!! Shoot, him and Ponch, and Gunboat, will work for dairy queen treats! lol just jt Yes, but you would have to buy out the whole store...
Gray Ghost Posted April 25, 2011 #20 Posted April 25, 2011 Welcome to the forum Dana. Hope to see you out Texas way sometime. What class were you at USASMA? Cliff Fargason Class 37
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now