Harbor Freight lift coupon

[Freebird]

Would any of you happen to have one of these coupons that you want to part with? I understand that they were in some motorcycle magazines. I would sure like to have one.

[Keemez]

How bout this one? (I know... not the same thing, but equally useful)

 

http://www.harborfreight.com/lightweight-aluminum-motorcycle-lift-94715.html

[MiCarl]

Don,

 

I don't have it but googled it. Looks like it's in Cycle World. The post I found was dated March 22.

[BradT]

Would any of you happen to have one of these coupons that you want to part with? I understand that they were in some motorcycle magazines. I would sure like to have one.

 

Do you have that one coupon and want another to buy more than one unit ?

 

The coupon says limit 3 does not say that one coupon can not buy more than one exact item. Says one coupon per visit per day and is limited to 3.

 

Brad

[dray]

Would any of you happen to have one of these coupons that you want to part with? I understand that they were in some motorcycle magazines. I would sure like to have one.

 

 

Don if you do get one you know HF is one place that will let you use that coupon with a 20% off coupon also

 

i have done it many times at our store

[Guest Zak202]

I cannot find that coupon anywhere. I belong to their Inside Track Club, and that is not offered to their members at that price either. If I do find it, I will be sure to post it here.

[Wizard765]

Don if you do get one you know HF is one place that will let you use that coupon with a 20% off coupon also

 

i have done it many times at our store

 

Where can you get a 20% off coupon?

[dray]

Where can you get a 20% off coupon?

 

 

every now and again you will find one online just print one they will take printed coupons

[flb_78]

Has anyone ever seen a lift like this? It raises the bike 30" off the ground.

 

http://www.harborfreight.com/high-position-motorcycle-lift-99887.html

 

http://www.harborfreight.com/media/catalog/product/cache/1/image/370x/9df78eab33525d08d6e5fb8d27136e95/i/m/image_4336.jpg

[Freebird]

Do you have that one coupon and want another to buy more than one unit ?

 

The coupon says limit 3 does not say that one coupon can not buy more than one exact item. Says one coupon per visit per day and is limited to 3.

 

Brad

 

No, I don't have one. I found that picture online. Actually, there is some guy selling them on Ebay.

 

As for the 20% off, they are running that sale right so if you can use the coupon AND the 20%, that would be one heck of a deal.

[Freebird]

How bout this one? (I know... not the same thing, but equally useful)

 

http://www.harborfreight.com/lightweight-aluminum-motorcycle-lift-94715.html

 

That one looks OK but I already have the Craftsman floor lift that works fine. I just think the table lift would be very handy.

[Freebird]

Has anyone ever seen a lift like this? It raises the bike 30" off the ground.

 

http://www.harborfreight.com/high-position-motorcycle-lift-99887.html

 

http://www.harborfreight.com/media/catalog/product/cache/1/image/370x/9df78eab33525d08d6e5fb8d27136e95/i/m/image_4336.jpg

 

I saw that one and it is interesting. I think that I would just feel better with mine on a table instead of hanging. That one sure would work better for changing both tires at the same time though.

[Freebird]

Don,

 

I don't have it but googled it. Looks like it's in Cycle World. The post I found was dated March 22.

 

Thanks. I think I'll stop by a store today and look through some of the magazines and see if I can find it.

[bkuhr]

I get about 5 20% coupons every week, have about 30 stocked up. Anyone need one?

Don, need to look back thru the adds, but don't think I saw this lift, will check this afternoon.

[twigg]

Has anyone ever seen a lift like this? It raises the bike 30" off the ground.

 

http://www.harborfreight.com/high-position-motorcycle-lift-99887.html

 

http://www.harborfreight.com/media/catalog/product/cache/1/image/370x/9df78eab33525d08d6e5fb8d27136e95/i/m/image_4336.jpg

Last time I saw something like that it was in a very exclusive club ..... Dang! Did I just say that out loud?

[etcswjoe]

Would any of you happen to have one of these coupons that you want to part with? I understand that they were in some motorcycle magazines. I would sure like to have one.

 

It is not in this months flyer, however I get a new one each month and if it is in May's I would be happy to send it to you.

[naturbar]

don try this..... .... click on the coupon image, the click on the enlarge button, i did a Print Screen of this coupon - it's even a better price.....hope it works..

 

Harbor Freight 1000lb Motorcycle Lift Table Coupon | eBay

 

here is a link to a printable 20% off coupon

 

http://printable-coupons.blogspot.com/2006/07/harbor-freight-coupons.html

Edited April 19, 2011 by naturbar

[MiCarl]

Has anyone ever seen a lift like this? It raises the bike 30" off the ground.

 

http://www.harborfreight.com/high-position-motorcycle-lift-99887.html

 

http://www.harborfreight.com/media/catalog/product/cache/1/image/370x/9df78eab33525d08d6e5fb8d27136e95/i/m/image_4336.jpg

 

I thought about adding one for the shop. Be very handy for tire and oil changes. Take up lots less space than a lift.

 

Problem I see though is most bikes are either wrapped in plastic or have the pipes below the frame. That's why Carbon One makes lift adapters for the Venture.

 

Thought about making sliding saddles for it to reach up past pipes to the frame but in the end decided it was getting too impractical.

[jemorrisonjr]

The Harbor Freight lift works great, the BIL bought one and I used it when I did some mods. Seemed to me that it was just a little to short for the TD... Wheel sat on the lip of the ramp so I couldnt remove it...

[Freebird]

don try this..... .... click on the coupon image, the click on the enlarge button, i did a Print Screen of this coupon - it's even a better price.....hope it works..

 

Harbor Freight 1000lb Motorcycle Lift Table Coupon | eBay

 

here is a link to a printable 20% off coupon

 

http://printable-coupons.blogspot.com/2006/07/harbor-freight-coupons.html

 

The first link didn't work. You were probably logged in at Ebay when you copied it. The links don't work if you are logged in.

[Freebird]

The Harbor Freight lift works great, the BIL bought one and I used it when I did some mods. Seemed to me that it was just a little to short for the TD... Wheel sat on the lip of the ramp so I couldnt remove it...

 

That would be a deal killer for me. I guess I need to do some measuring first.

[a1bummer]

I have a couple of the 20% off coupons I got out of Car & Driver from the lobby at the Dr.'s office. I don't remember if there were any of those specific coupons though. When I got my lift from them, it was on sale for $299 already w/out a coupon. They looked at me funny when I had them put the crate on the trailer behind my bike though for some reason. It works good for what I needed it for. I've been having troubles with a degenerative joint disease bothering my hips, knees, and ankles. My back also goes out now and then due to poor lower body mechanics if I'm not careful. I wish I had gotten the one with air over hydrolic assist though, and bigger wheels on the front would help. My knees don't always work so good pumping that pedal. I also added a couple eye bolts to the front corners for more securing points. The locking system could be better as well. But it does work. I also learned quickly that I don't want to actually ride the bike up onto it. And once the bike was secured, I had to get creative to get it on the center-stand. A better wheel locking system up front to make sure the bike stays upright while it's being strapped down would be nice as well.I'm thinking about one of those automatic locking wheel-chocks would do the trick.

 

But all-in-all, I don't have to kneel or squat and break my back anymore. And that was my main goal.

 

Bill

[V7Goose]

May '11 issue of Hot Bike Bagger Pg 77 coupon expires 7/22/11.

 

I have seen those coupons a lot, but most of them from late last year. I currently have over 30 full page coupon adds from HF, but none of them have that lift (they also are not from bike magazines).

 

I can send you all the 20% off coupons you want, but you can also print them from their web site. Only one 20% coupon can be used at a time - it is only for the single most expensive item you buy at that time, and it cannot be combined with other coupons. It CAN be combined with sale prices and any special deals that do not have a specific coupon code that must be entered, but their computer will only allow one coupon code per item. Sometimes you can talk them into overriding that, but not usually.

 

Good luck finding one!

Goose

[V7Goose]

Print the attached. It has the numeric code removed so no good for online, but should work great in store.

Goose

Edited April 19, 2011 by V7Goose

[Snarley Bill]

I thought about adding one for the shop. Be very handy for tire and oil changes. Take up lots less space than a lift.

 

Problem I see though is most bikes are either wrapped in plastic or have the pipes below the frame. That's why Carbon One makes lift adapters for the Venture.

 

Thought about making sliding saddles for it to reach up past pipes to the frame but in the end decided it was getting too impractical.

i have one of those. it works great. i had to modify it and put castors on the rear and small steel wheels on the front. this was a must because it has to roll fore and aft when you start raising the bike. i also have a lift table. it makes a nice work table when a bike is not on it. great for junk storage to.lol