saddlebag reflector

[w.steve wells]

i added the saddlebag side rails trim and had to remove the side reflector from the crash bar is there a replacement for the smaller size bars or someother type that can be added. thanks for replies

[eusa1]

the added rails would come with a black split hose to put inside your reflectors to take up the space and allow you to install them horizontaly on the smaller rails.

mike

[w.steve wells]

well i guess the factory forgot to package one with my set of rails so i'm off to the hardware to buy a short hose to fit so thanks for the tip, spring's a comming so ride safe everyone steve

[Nemo]

I have a question. Where can I buy a set of those reflectors?

[eusa1]

I have a question. Where can I buy a set of those reflectors?

 

yamaha still sells them, same from 1999 to 2011

[Kirby]

Go to Lowe's or Home Depot and get 4 rubber grommets to use to adapt the reflector to the smaller rail. If I were at home I could send you a pic. Maybe later tonight.

[Kregerdoodle]

Mine didn`t come with them either...

 

 

 

well i guess the factory forgot to package one with my set of rails so i'm off to the hardware to buy a short hose to fit so thanks for the tip, spring's a comming so ride safe everyone steve

[Rick Haywood]

I just put a set on mine and they didn't come with it either but then again I didn't have the reflectors on the crash bars anyway so worked out great.

[Kirby]

This is what I found to mount my reflectors with. They need to be 3/4 inch inside diameter by 1 inch outside diameter measured at the bottom of the groove.

[Kirby]

Here's what they look like on the bike.