Venturous Randy Posted February 11, 2011 #1 Posted February 11, 2011 (edited) I don't usually post ebay listings on here because I feel if someone is paying attention to a listing on something they want, someone else should not post to the world of others too lazy to keep up with it. But, with the last transmission I picked up from an 86, which is after the correction, and me getting it for $25 plus a little shipping, there does not seem to be a lot of interest. So, I am going to post this and see if anyone is interested as in my mind this is absolutely the best way to fix a 2nd gear problem on an early 1st gen. With this and a few gaskets, I have not doubt you could end your 2nd gear problems forever as this is the way I did it several years ago on my bike. If anyone has any questions, just let me know. RandyA http://cgi.ebay.com/ebaymotors/1986-yamaha-xvz1200-xvz-1200-venture-ym85-transmission-_W0QQcmdZViewItemQQhashZitem3a6325d346QQitemZ250771526470QQptZMotorcyclesQ5fPartsQ5fAccessories Edited February 12, 2011 by Venturous Randy
Marcarl Posted February 11, 2011 #2 Posted February 11, 2011 It claims to be an 86, 1200, and 85. Not sure I'd want to take the chance. All that work to tear it down, for the sake of changing a washer, and doing the undercut on the gears,,,, I wouldn't spend the extra on the gears.
Venturous Randy Posted February 12, 2011 Author #3 Posted February 12, 2011 It claims to be an 86, 1200, and 85. Not sure I'd want to take the chance. All that work to tear it down, for the sake of changing a washer, and doing the undercut on the gears,,,, I wouldn't spend the extra on the gears. Thanks Carl. I sent the guy a note and told him there were too many discrepencies. I did not notice all this. Thanks and I agree with you. RandyA
coy55boy Posted February 12, 2011 #4 Posted February 12, 2011 Hmmm, You musta hurt his feelings. The ad is gone.
Venturous Randy Posted February 12, 2011 Author #5 Posted February 12, 2011 Hmmm, You musta hurt his feelings. The ad is gone. Gone and I did not even get a response from him. In my request, I even asked if was an 85 trans, what was the serial number on the bike. RandyA
Yammer Dan Posted February 12, 2011 #6 Posted February 12, 2011 I asked about this one a few days ago. He has a bunch of stuff listed as 86-1200 parts.
Yammer Dan Posted February 12, 2011 #7 Posted February 12, 2011 1986 yamaha xvz1200 xvz 1200 venture ym85 transmission Here it is.
Venturous Randy Posted February 12, 2011 Author #8 Posted February 12, 2011 1986 yamaha xvz1200 xvz 1200 venture ym85 transmission Here it is. Yeah Dan, the add is now back and I never got an answer to my questions. RandyA http://cgi.ebay.com/ebaymotors/1986-yamaha-xvz1200-xvz-1200-venture-ym85-transmission-/250771526470?pt=Motorcycles_Parts_Accessories&hash=item3a6325d346
Yammer Dan Posted February 13, 2011 #9 Posted February 13, 2011 He did answer me. Said he would check it out???
Venturous Randy Posted February 13, 2011 Author #10 Posted February 13, 2011 He did answer me. Said he would check it out??? Yep, same answer he just gave me too. RandyA
dingy Posted February 13, 2011 #11 Posted February 13, 2011 He did answer me. Said he would check it out??? Dan/Randy Do you need a 1200 transmission? I still have the one that came out of my 83 1200. It never had any symptoms of jumping out of second. If the thrust washer were to be changed I think it would be fine. 38,370 miles Gary
Venturous Randy Posted February 14, 2011 Author #12 Posted February 14, 2011 Thanks dingy, but I don't. I have the 86 trans in the 83 engine I will be taking out of my bike. I have another 86 trans I bought because it was so cheap at $25 that I may put into the 30K mile 83 engine that I am hoping to put the 2nd gen Venture trans in. Thanks anyway. RandyA
talonsx2 Posted February 19, 2011 #14 Posted February 19, 2011 so if i were to buy these parts all i would have to do is drop them in and I would be good? I just spent $180.00 on gear 5th wheel (the one with the three nubs). I could take it bake for a small restocking fee... So do I absolutley need to also buy gear 2nd wheel too (the one that the three nubs jump out of)? that would be another 100.00 bucks. thanks in advance. Michael
Yammer Dan Posted February 19, 2011 #15 Posted February 19, 2011 You could come out a lot cheaper with a mid-85 up tranny or undercut the gears you already have. I don't think I would try the undercutting if 2nd was completely gone til you couldn't use it at all but Randy would know more about this than I do as he has done the undercut on his. If it is just starting to pop out you could just replace the washers and get a lot more miles out of it. Several ways to go. Replacing the gears from Mama Yama probally the most costly way to go.
Keemez Posted February 19, 2011 #16 Posted February 19, 2011 This guy is practically in my back yard (I'm within 5 miles of Appleton)... want me to lay a beating on him?
Wizard765 Posted February 19, 2011 #17 Posted February 19, 2011 so if i were to buy these parts all i would have to do is drop them in and I would be good? I just spent $180.00 on gear 5th wheel (the one with the three nubs). I could take it bake for a small restocking fee... So do I absolutley need to also buy gear 2nd wheel too (the one that the three nubs jump out of)? that would be another 100.00 bucks. thanks in advance. Michael If the gears are truly out of a Mark 2 (86 and up) and he says they are then you could drop the set in and all would be good. YES and more cost effective than buying the gears from Mamma Yamma but you would still need to buy the split washers.
dingy Posted February 19, 2011 #18 Posted February 19, 2011 Dan/Randy Do you need a 1200 transmission? I still have the one that came out of my 83 1200. It never had any symptoms of jumping out of second. If the thrust washer were to be changed I think it would be fine. 38,370 miles Gary This transmission has found a new home in Canada. Gary
Venturous Randy Posted February 20, 2011 Author #20 Posted February 20, 2011 so if i were to buy these parts all i would have to do is drop them in and I would be good? I just spent $180.00 on gear 5th wheel (the one with the three nubs). I could take it bake for a small restocking fee... So do I absolutley need to also buy gear 2nd wheel too (the one that the three nubs jump out of)? that would be another 100.00 bucks. thanks in advance. Michael Michael, I have done it both ways. About 12 years ago, i tore down my 83 and undercut and matched 2nd and 5th gear. 60,000 miles later I had an 86 trans and pulled it apart and dropped it in. I have put probably 30,000 plus miles on it and it is working great. I am not sure about this, but I have heard that the spring that ultimately pushes on the thrust washer is not as strong on the 86 up transmissions and it reduces wear on that area. These transmissions pop up on ebay ocassionally and rarely go for a lot of money. RandyA
talonsx2 Posted February 22, 2011 #21 Posted February 22, 2011 So i guess i am still a little confused if i still need to buy the 2nd wheel too? Thanks for your replies. Michael
cliffno350 Posted March 29, 2011 #22 Posted March 29, 2011 I got a low mile 88 complete trans, will this drop right into an 83?
Yammer Dan Posted March 29, 2011 #23 Posted March 29, 2011 Should do it. Do you have the thrust washers? I would buy new ones. Maybe not necessary but I would put new washers in there if I was tearing it down. Don't think they cost a lot???
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now