dogman Posted March 28, 2011 #27 Posted March 28, 2011 Flyinfool, are you going to bring a helicopter or plane to entertain us with at MD?
Flyinfool Posted March 28, 2011 Author #28 Posted March 28, 2011 I'm still trying to find Garage!! Whats a Garage????? Flyinfool, are you going to bring a helicopter or plane to entertain us with at MD? Never can tell what I might do...... I'll have to see how much if any room is left once all of the important stuff is packed. I'm used to traveling with a full size ex cab long box P/U, and I fill that with stuff for just a weekend trip.......lol Then there is the responsible adult side of me that sneaks a peek out once in a while. With that many people around I am not sure if it is safe to bring any kind of flying contraption down there.....
RedRider Posted March 28, 2011 #29 Posted March 28, 2011 Well I am making progress. #4 HF Trailer is bought and the frame and coupler assembled. acquired the car topper to go on it. Jeff, Guess that means you don't need to borrow my trailer. Yup, ready for the snow to go away so I can ride. It has until Thursday to go away. My first ride starts Friday. Nothing like taking a bike out of winter storage and the shakedown cruise is a 5700 mile jaunt to CA and back. RR
Flyinfool Posted March 28, 2011 Author #30 Posted March 28, 2011 WOW And last spring I was afraid to do a spring shakedown cruise just up to your place. I'll never make Iron Butt....... Good luck and have fun getting to CA and back.
bongobobny Posted March 29, 2011 #31 Posted March 29, 2011 For driving lights, just buy a pair of cheap driving lights from Wally World for anywhere from $10 to $20 and McGuiver some mounts and you should be good to go there...
Flyinfool Posted March 29, 2011 Author #32 Posted March 29, 2011 I have been thinking of that as long as they use H3 bulbs so that I can convert them to 35W HID in the future.
Flyinfool Posted April 1, 2011 Author #33 Posted April 1, 2011 Well picked up a H3 HID lights setup to put in them. Got the HID setup for $37.00. I'll pack the halogens that come with the lights..... Started the mounting of the hitch on the bike, this part is turning into a PITA. ANOTHER run to the hardware store for different bolts. I suppose that I should start on the must do list instead of all of the wish list items....... But the wish list items are more fun to do......
Flyinfool Posted April 10, 2011 Author #34 Posted April 10, 2011 (edited) I am updating the first post with progress notes. More good progress on #2 & 11 http://www.venturerider.org/forum/showpost.php?p=576144&postcount=16 Hopefully I can get the new receiver hitch mounted this week. Then I can dive into finishing the trailer build. AND the rest of the list. Dang June 3 is coming fast. Edited April 10, 2011 by Flyinfool
Scooter Bob Posted April 10, 2011 #35 Posted April 10, 2011 (edited) I suppose that I should start on the must do list instead of all of the wish list items....... But the wish list items are more fun to do...... Ya hey, kinda like me building a bar in the garage instead of the lift adapters so we can actually do some wrenchin' at our MD! Later, Scooter Bob Edited April 10, 2011 by Scooter Bob
IH Truck Guy Posted April 10, 2011 #36 Posted April 10, 2011 Ya hey, kinda like me building a bar in the garage instead of the lift adapters so we can actually do some wrenchin' at our MD! ( edit in "doh" smilie ) Later, Scooter Bob Hey buddy,even if we can't make it,I'll still make sure that you have the lift table....
IH Truck Guy Posted April 10, 2011 #38 Posted April 10, 2011 Hey Dan, Hows the noggin? Had a MRI on Friday and that confirmed what they said in Montana...Hydrocepulus We meet with the nuerosurgeon on Tuesday and he will schedule the surgery... Can't wait....
Flyinfool Posted April 17, 2011 Author #39 Posted April 17, 2011 (edited) The Receiver hitch is finally done, painted, and permanently mounted for the last time. That takes #2 & #11 off the list. To me at least, that is two biggies. Edited April 18, 2011 by Flyinfool
Flyinfool Posted May 1, 2011 Author #40 Posted May 1, 2011 I got #1 on the list done last night. The center contact for the switch has a bunch of crud/corrosion on it. I used a soft brass wire wheel in my Dremel to clean it up, regreased it, and it works great now. While I was in there I also cleaned and regreased all of the contacts in all of the switches. I also noticed that there was room to install a switch to turn the headlight off. The best thing is that the wire that needs to be switched is right there. Just have to take the blue wire off the HI/LO switch and connect it to the new switch, and add a 1 inch jumper from the new switch back to the HI/LO switch. That will allow me to keep the HID off till the engine is started.
Flyinfool Posted May 8, 2011 Author #41 Posted May 8, 2011 There is light at the end of the tunnel. There are only a couple of items left on the must do list and a couple left on the wish list. I just hope that the light is not just a train coming......
Flyinfool Posted May 8, 2011 Author #43 Posted May 8, 2011 It is still at the point of me needing to make the fixture for the final cuts of the ramp. My mill has been tied up making the hitch and some other things that are on the must do list. It is going to take a lot longer to make the fixture and get the mill all set up than it will to actually make the final cuts. I still hope to have a bunch of them for MD.
Scooter Bob Posted May 8, 2011 #44 Posted May 8, 2011 There is light at the end of the tunnel. There are only a couple of items left on the must do list and a couple left on the wish list. Did you remember to add this to yer list... I should Duck Tape a block of wood to the top of my left boot toe. Oh wait, this involves wood, did I just reply to the wrong thread. Best of luck on the project Jeff, sounds like you've taken most of the bites out of that elephant. Later, Scooter Bob
Flyinfool Posted May 8, 2011 Author #45 Posted May 8, 2011 I guess I'll have to make sure that I always have wood available.
BIG TOM Posted May 9, 2011 #46 Posted May 9, 2011 cross off # 13..............told you it was wild.....
Flyinfool Posted May 9, 2011 Author #47 Posted May 9, 2011 That's not wild, it is just my style. Thanks Tom, You da man.
Aussie Annie Posted May 10, 2011 #48 Posted May 10, 2011 A Venture Rider decal stuck on the back of that helmet [under silver "V"] would just set that lid off nice
Flyinfool Posted May 10, 2011 Author #49 Posted May 10, 2011 I'll have to see if I still have an extra one around. I was going to put the last one I have on my new trailer. I also have some other ideas up my sleeve.
Flyinfool Posted May 11, 2011 Author #50 Posted May 11, 2011 Got all of the electrical done. The 5-4 powered converter is installed under the seat and the waterproof cig lighter outlet is installed in the dash for the GPS. Still deciding just where I want to mount the GPS, I'm reading all of the GPS mounting threads for ideas, some I like and some I do not. I am leaning tword making a plate that will mount to the top of the master cylinder using the same screws that hold down the cover to the master and then uses the ram mount above that. I will carry a supply of Ziploc baggies to put over the GPS in case it rains. I also see that there may be a need to run a power line to the trunk. I was looking at getting a cheap MP3 player and an FM transmitter that I could just leave in the trunk and then pick up the tunes on the bikes radio. It would also give me a dry place to plug in the cell phone for charging. Next project is getting the driving lights installed and set up.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now