Clutch question

[Godlover]

I have a friend who has an 83 and he did some repair work on it. Now - when he pulls on the clutch lever it won't move - but when he loosens the bleeder - it will. He also can't get it to shift even into Neutral. I know he had to replace the stator cover. Any suggestions.

[MasterGuns]

I have a friend who has an 83 and he did some repair work on it. Now - when he pulls on the clutch lever it won't move - but when he loosens the bleeder - it will. He also can't get it to shift even into Neutral. I know he had to replace the stator cover. Any suggestions.

 

He installed the pressure plate wrong.

[Godlover]

Not sure if he had the clutch out - but I'll ask him - thanks

[Dano]

If he worked on the clutch or pulled the slave cylinder, then the rods could be stuck or as posted before the cover's not on right. I would also make sure the knuckles on the shifter arm and the relay arm behind the stator cover are pointed in the correct directions. If not, they could be keeping him from shifting.