Double D Posted August 12, 2010 #1 Posted August 12, 2010 I have had this on the bike for about 3 years now. It worked fine until last year. When I have the turn signal going and hit the brake the light stops blinking but when I release the brake it starts right back up. I hooked the trailer to the car and it works fine. I have checked all the wiring connections and they all look good. We want to get everything working before we take our 10 day trip :biker:in October so am I over looking anything? If not I will just have to buy a new modulite. Thanks
Shamue Posted August 12, 2010 #2 Posted August 12, 2010 could be a week ground and you could getting feed back. make sure you are using a converter on the mc if you are going to a 4 wire plug on the trailer.
dmoff1698 Posted August 12, 2010 #3 Posted August 12, 2010 +1 on a flakey ground connection. I chased almost exactly the same problem for several hours before finding a ground connection that looked good and even worked if you held your mouth just right. BTW Some people wire up a trailer system using the toung/hitch connection for ground. This may work for a while just fine, but the least little dirt or rust on either will start giving you fits.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now