T.J. Posted August 5, 2010 Posted August 5, 2010 I just installed a zumo 660 on my 04 Venture. I up graded from a 450. I still have the fairing split but should have it back on tomorrow night. I drilled a 1" hole to the left of the left hand speaker "right hand as you are looking from the front towards the back of the bike" with a wood drill bit to run the cables through. Simple and up high and there is plenty of room. I will send a picture of the hole in a little bit. What I wanted to share was that I took Squidley's advice from his "Installing an Aux line splitter" and went to Radio Shack and bought the cables he mentions in his article. I can now hear the Garmin through the head sets. The install was cheap and easy. Thanks again Squid for a job well done. P.S. The picture did not turn out. Sorry.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now