stop premature lock up....front and rear

[Guest Zachtcb]

This new product is hydraulic brake control valve. This little valve replaces your existing banjo bolt. You can use this part in the master cylinder or caliper. If you have 2 calipers in the front, but it it the master cylinder to run both calipers. The reason for that is, we are relieving the initial grab in the brake system, or a pressure spike. There are four different levels of this part depending how you like to ride or how you like the feel of the breaks. This part also gets your shocks involved. The shocks absorb majority of the wieght instead of the ground or tire. This part also saves 3 times the wear and tear on your pads. The easiest way to discribe how it feels is, like the brakes in a car without the ABS reaction. The hard you apply the faster you slow down. The TCB valve will not completely prevent lock up. The lock up is later in the braking prosses.Just lock up happens when you want it to. Please ask as many questions you might have. Again thanks for the support.

 

 

Regards Zach

[Guest Zachtcb]

sorry for the typos.

[Orrin]

Zach, just received in the mail the Lifesaver vlave. Looks good and can't wait to get back on the bike and try it out. Thanks:cool10:

[Guest Zachtcb]

I am glad it made it. It might take a little getting use to. Enjoy. Thanks for all your interest in this part.

 

 

Regards Zach