Battery Probe 88 Venture Royale

[majkongb52]

I installed a glass mat battery that is sealed and now have no place for the battery probe and of course the warning light stays on. Is there a remedy for this. Thanks

[Props]

check it out.... http://www.venturerider.org/forum/showthread.php?t=489

[Rody 1949]

Great solution. My problem is I don't have an accessory fuse, I have three spare fuses on the back of the cover. (my bike is a Venture 86)

Where would my lead be connected to?

Thank you so much.

[MiCarl]

Unless the fuse box has been changed you do have an accessory fuse. The two screws just forward of the stock box are for accessory connection (one is hot, the other is ground).

 

Realistically though you can hook it to any switched hot.

[Rody 1949]

Unless the fuse box has been changed you do have an accessory fuse. The two screws just forward of the stock box are for accessory connection (one is hot, the other is ground).

 

Realistically though you can hook it to any switched hot.

 

 

Got it! Thank you so much.

[jasonm.]

the accessory terminal is fused on my Royale