Amp-Tuner Pin out

[SilverSoul]

Hey all gurus out there.

I was wondering if anyone could please give me the pin out for the tuner port (8-pin din) on the 1st gen amp.

 

I'm thinking about pulling both the cassette AND the tuner and just replacing them with a standard car stereo.

 

If you look at the electronics it doesn't seem like it would be that hard. The power/volume control for the amp and the intercom all go directly to the amp and the tuner is a separate unit that could conceivably be pulled. All I need to know is the pin out on the amp.

 

I would end up with two volume control knobs but that won't bother me.

 

If I get the pin out and do this mod I'll be sure to include pictures and directions on how do it for anyone else who might be interested.

[friesman]

I know its in Here on the VR site somewhere, but a friends site is bookmarked so I will send you to Scotts delusional mechanic site. Its a lot of fun, but he does know his stuff.

The link I am sending also shows how to set up an mp3 player.

 

http://www.scienceman.com/dm/pages/gps.html

 

Brian

[SilverSoul]

Thanks for the link but he only has the pin out for the CB on the amp and not the tuner. I'll probably be using the CB pin out some time in the future too though.

[Freebird]

I think this is the only one on this site. It is for the headsets though.

 

http://www.venturerider.org/forum/showthread.php?t=499

[dingy]

I also have this one.

 

Probably not what your after though.

 

Gary

[SilverSoul]

I'm not sure the information I'm looking for is gonna be found but it is worth checking.

[friesman]

I do have a new Pioneer cd/mp3 with usb port and ipod port already mounted into a side panel and with the ends of bikes wires neatly cut so it should be easy to rewire it into another bike. It comes with the weatherproof cover. It is barely used, I installed it and then found that I missed the speed variable sound and the handlebar mounted mute and station change so I changed it back.

If you are interested pm me and Ill send you some more info.

 

Brian

[SilverSoul]

thanks for the offer friesman1 but i'd need to get the pinout on the amp before I tore out a working system.

[mbrood]

I've only worked out the tray interconnect for the cassette...

 

http://www.bergall.org/temp/venture/radio%20tray.jpg