RSV - rear wheel "alignment"??

[BigBear]

A couple of weeks ago, I pulled the rear wheel, differential and drive shaft to do the typical maintenance items. All came apart as expected, and all went back together as expected.

 

Question -> Is there any kind of rear wheel alignment that has to occur?

 

Or does the bolt-up procedure insure proper rear-wheel alignment?

[M61A1MECH]

Walt

I just emailed you the service bulletin on aligning the rear wheel to ensure there is no popping noise while backing up.

 

Other than that I am not aware of any "alignment" procedure.

Good luck.

[KiteSquid]

You can download the factory service manual for FREE from the link in the VRTech section to read all the factory maintenance procedures.

 

 

HOWEVER there is an occasional error, like in the carburetor synchronizing procedure they number the carbs incorrectly...... gotta love Yamaha.

[BigBear]

Thanks for the data!

[Jeff kelton]

On 6/21/2010 at 12:09 PM, M61A1MECH said:

Walt

I just emailed you the service bulletin on aligning the rear wheel to ensure there is no popping noise while backing up.

 

Other than that I am not aware of any "alignment" procedure.

Good luck.

Can you please send me some info how to reuline the rear tire ? My bike filles like the bike is moving side ways when give it gas

On 6/21/2010 at 10:55 AM, BigBear said:

A couple of weeks ago, I pulled the rear wheel, differential and drive shaft to do the typical maintenance items. All came apart as expected, and all went back together as expected.

 

Question -> Is there any kind of rear wheel alignment that has to occur?

 

Or does the bolt-up procedure insure proper rear-wheel alignment?

 

[videoarizona]

Jeff, Did you look in the tech section for the manual? The procedure is there....

David