Jump to content

Recommended Posts

Guest Slab_Ryder
Posted

Greetings all. How does one figure out the maximum Tire Temperature for a monitoring system on a Venture?:Cool_cool36:

Posted

Can you just read the temperature before you put in a temp to alert you at?

 

If so, I would just make sure the pressures are correct, then ride the bike and watch the temperature and see how high it goes. If you are on a hot day, then set the temp about 10 degrees above that? I would think you would want it at least 10 more than a hot normal ride. To do any real damage, I would think it would be WAY higher than that so unless it false alarms too much at 10 degrees, you should be OK.

Posted

my front tire runs around 95 degrees, and the rear at about 130 on an average summer day.

the info that dyno gives you is your best bet, just put any number in and watch and see what it does, then set your warnings at a level that your comfortable with.

 

mike

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...