Freebird Posted May 27, 2010 #1 Posted May 27, 2010 (edited) The question has been asked a few times if there was a gear indicator available for the Royal Star Venture and the Royal Star. I have been in contact with the same company that makes the Speedohealer and they do have one that will work on our bikes. I have been 100% pleased with the Speedohealer so decided to add the gear indicator also. This is a simple plug and play device that indicates what gear you are in. I just ordered one and will give a full report on it after I receive and install it but if this is something you have been interested in, you can find the information here. They told me that we should purchase from their USA Distributor: http://www.calsportbike.com/gpx but the manufacturers website is: http://www.healtech-electronics.com/ From the info they sent to me: The GIpro X-type will work great. Part number: "GIPRO-X-color + GPX-Y01" Where 'color' is either Red or Blue Price is $132.99 Edited May 28, 2010 by Freebird
SilvrT Posted May 27, 2010 #2 Posted May 27, 2010 Good to know and for some maybe good to have. For me ... engine sound is about all I need and the only time I tend to care what gear I am in is when I'm stopped... "did I put it in 1st or is it still in 2nd?" .... then comes the foot with a second and third "insurance" down shift attempt... lol
dingy Posted May 27, 2010 #3 Posted May 27, 2010 Out of curiosity, I looked at the site for the gear indicator. What I could gather from the FAQ section is that the indicator will only work when the clutch is released. It seems that they are taking the RPM's and comparing it to the speed reading to determine a gear. This would not then possibly give an accurate indication if you where coming up to a light with the clutch in and down shifting through the gears as you coasted up. Another thing that may be a fly in the ointment is the people that have changed the rear end out to VMax gearing. Will there be a way to reprogram the logic to compensate for the RPM increase in any given gear? Interesting idea, but may not be as good as the 1st gen Royale's dash indicator. Gary
Freebird Posted May 27, 2010 Author #4 Posted May 27, 2010 Take a look at this test. Anyway, mine will be installed soon and then I can give a better report on it. The one for our bikes does not have the ATRE though. http://www.webbikeworld.com/t2/healtech-gear-indicator/healtech-gipro.htm
rumboogy Posted May 27, 2010 #5 Posted May 27, 2010 I'm interested in this...looking forward to your review Freebird.
screamstone Posted May 27, 2010 #6 Posted May 27, 2010 Me too! Can't wait to see it. I'd love this addition!
Freebird Posted May 28, 2010 Author #7 Posted May 28, 2010 I just learned from the manufacturer that USA orders should go through their USA distributor: http://www.calsportbike.com/gpx
N3FOL Posted May 28, 2010 #9 Posted May 28, 2010 The price is a little steep for me for what the device is going to do. However, I am also interested as to how it would accurately work on the Venture and eventually be inclined to buy one in the future. Thanks for taking the time to share this to forum members.
rumboogy Posted June 5, 2010 #10 Posted June 5, 2010 Don, Have you installed the gear indicator yet? Just curious if the install went well and if the product works OK. Wally
Freebird Posted June 5, 2010 Author #11 Posted June 5, 2010 No, haven't even seen it yet. I've been out of town all week. Won't get home until late tonight. Don't know if it has arrived or not.
rumboogy Posted June 5, 2010 #12 Posted June 5, 2010 Thanks, juust waiting on an update...sounds interesting.
jeff2053 Posted November 3, 2010 #13 Posted November 3, 2010 Just wondering if you've tried this yet I'm interested so just curiuos how it worked. Also I've e-mailed Ponch to see if he would be interested modifying his gauge plates to accept the gear indicator Would others be interested in this as it might be easier to get him to do this if there was enough interest Jeff
Freebird Posted November 3, 2010 Author #14 Posted November 3, 2010 It's still hanging on the pegboard in my garage. I'll try to get around to it this weekend and report back on how well it works.
Venture Steve Posted February 14, 2011 #16 Posted February 14, 2011 Freebird,, What is the latest on that gear indicator??
Freebird Posted February 14, 2011 Author #17 Posted February 14, 2011 uh..yea...I need to get on that....still hanging on the pegboard.
awsmsrv Posted April 12, 2011 #18 Posted April 12, 2011 uh..yea...I need to get on that....still hanging on the pegboard. Can ya hear me now?
Freebird Posted April 12, 2011 Author #19 Posted April 12, 2011 Soon....very soon. Garage is FINALLY warming up. Maybe I'll get to it next weekend.
Yammer Dan Posted April 12, 2011 #20 Posted April 12, 2011 I just look at my tach..... I just look at my gear indicator..... yrs ahead of their time.....
eusa1 Posted April 12, 2011 #21 Posted April 12, 2011 arms crossed......tapping of steel toe boot......still waiting.....
friesman Posted April 12, 2011 #22 Posted April 12, 2011 Gee Don it looks like you have a honey-do list for home.... and now these guys are setting you up a yammy-do list for all of that spare time you have..... Brian
Freebird Posted April 12, 2011 Author #23 Posted April 12, 2011 HA...that is nothing. You should see the honey do list that Eileen has for me that apparently has to be done before Maintenance Day.
Yammer Dan Posted April 12, 2011 #24 Posted April 12, 2011 I got my list caught up for once!!! Well the grass needs mowed...... How do they think up that stuff??
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now