trailor wiring

[joebo360]

can someone please tell me where to get the wiring to tow a trailor? I would like to hook one up.

[BuckShot]

Do you have the trailer? Do you need a 4 or 5 pin wire harness? Any auto supply store sells what you need. Where to wire into your bike, I couldn't tell you. But someone will chime in.

[eusa1]

under the seat between the battery and the rear fender.

mike

[dingy]

Attached is a PDF I made for the RSV's showing a trailer wiring hook up.

 

1st gen's will be the same as far a tying into lights.

 

Gary

[dave_wells]

You may want to get the trailer first

or at the least know the type of connection the trailer has

 

example

My camper has the amber blinkers separate from the brake and running

Some may call it independent blinkers

 

My tour deluxe has the same same setup as the trailer easy set up

 

My cargo trailer had 2 lights on the back very common each light has each does running brake and blinker

 

you will need an adapter for this any auto store

 

as some one mentioned 4 or 5 pin connector

 

I have 1 of each on the bike

 

The connections are under the set

Then run it out along the frame under the saddle bag

 

I can try to get you a picture I may be doing a few things on the bike Sunday

I will have the seat off

 

I hope this helps out

There are plenty of people here to help you

[casabroker]

Under the seat left side is the brake wiring coupling. Just use the squeeze together couplings to connect your plug. I have about a 3 foot plug and when i need it i just run it between the bag anfd down to the trailer. When not in use I wind it up and stuff it under the tool kit.