CMIKE Posted April 8, 2010 #1 Posted April 8, 2010 A Brand New Dunlop E3 has a tread depth of 11/32 for the rear. I have 10713 miles on mine and still have almost 6/32 left. (not quite 6/32 after several measurements) I just got back from a 675 mile trip and it moved it off the 6/32 mark. It was a solid 6/32 before I left. So how many miles do you think I will get with this rear tire...and when should I change it and still be safe. Running it to the threads show is not what I consider safe. I am thinking at about 4/32 pull if off. I already have a new one ready to go in its place. I am very pleased with this tire...
jfoster Posted April 8, 2010 #2 Posted April 8, 2010 I would think 20k...Me personally, I'll run it down to bout 1/32 in the center and change it. (most will probably disagree) Where ever you feel safe. Car tires are recommended at 2/32 and to me 4/32 is alot of tread left in the center to get rid of it, especially for what they cost. On the flip side, I ordered an E3 today. I've gotten bout 13k out of a meztler and it has bout 1/32 left left in the center.
kevin-vic-b.c. Posted April 8, 2010 #3 Posted April 8, 2010 What is the date code on the tire.... the only E3 tires I could get locally had a date of 13 05. Dunlop said to remove from service after 6 to 7 years of date code no matter the wear.
Sleeperhawk Posted April 8, 2010 #4 Posted April 8, 2010 I went with 16000 but again, my rule is I replace the rear every year, regardless of how close I am to the wear marks.
GeorgeS Posted April 8, 2010 #5 Posted April 8, 2010 3 years ago I pull off an E2 that went over 20K. Still had a " safe " amount of tread left. I cross cut the old tire, and found that the Casing is 1/2 inch thick. ( the 404's are about 1/4 thick )
Dave3 Posted April 8, 2010 #6 Posted April 8, 2010 I put 18k on my 404's about 2/32 left. Just switched to E3's last week. Nice ride so far. Going on a 2k round trip Monday.
CMIKE Posted April 9, 2010 Author #7 Posted April 9, 2010 What is the date code on the tire.... the only E3 tires I could get locally had a date of 13 05. Dunlop said to remove from service after 6 to 7 years of date code no matter the wear. 3508 on the ground now...new one 4509...
beyeker Posted April 9, 2010 #8 Posted April 9, 2010 I've got 12,500 miles on my III and lots left, another 3000 miles minimum.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now