Basket Thrust Washer Question ?

[Cougar]

I need to know if this is correct.

 

[ATTACH]43583[/ATTACH]

 

[ATTACH]43584[/ATTACH]

 

[ATTACH]43585[/ATTACH]

 

[ATTACH]43586[/ATTACH]

 

[ATTACH]43587[/ATTACH]

 

 

 

The thrust washer that is behind the basket that

holds all the friction disks , It goes on the splines

and then drops onto the flat round part leaving

space and wiggles around is this correct ?

There are no splines after that and under the clutch

basket it self. Just wanted to make sure.

Thanks,

Jeff

[Squeeze]

That's OK, the Notches on the Washer are designed like that to keep the Washer as close to the inner Diameter, not tumbling.

[FreezyRider]

Jeff,

To me, that doesn't make sense. Why go to all the trouble to make a thrust washer with an internal spline ($$) if it isn't going to use those splines once installed, but just sit in a spot with no splines? I don't think something is right here.....

 

Joe

 

Edit: Of course, after reading Squeeze's reply, maybe I'm all wet!

[Cougar]

Right. I even pulled the clutch basket all the way off to make sure

if there where any splines to go onto but there is none. I remember

when I first slide the friction basket off that washer was perfectly

on the back side of it. with the oil keeping it in place I guess. but

I agree why did they add the teeth to the thrust washer? when

there is nothing to hold it at the end?

 

Squeeze huh? so look at my pictures again please. I just am not understanding yet

[Cougar]

maybe in lamins term squeeze is saying if the notches are on there , in short

once it reaches the open area. there will be less to move around? make since?

hehehe

[Cougar]

And I took this all apart for nothing? (I just could not sleep last night over this washer)

 

But boy and sure can change a basket out fast now!

[Squeeze]

maybe in lamins term squeeze is saying if the notches are on there , in short

once it reaches the open area. there will be less to move around? make since?

hehehe

 

 

Yes, that's what i was trying to say. Thanks for translating ...

[Cougar]

Thanks Much Squeeze , Yud Da Man!

More like splain it to a dummy terms