Jump to content

Recommended Posts

Posted

My 83 venture seams to want to vear off from side to side going down the road at any speed. All I can find is the front pressure keeps going up to 22 psi. I set the guage to manual but it keeps going to auto and build pressure. Would this be the problem of the weaving or is it some thing else.

The scoot went on craigslist the first of the week. Going to down size.

Posted

22 lbs in the front is past the max pressure for the front. If your rear pressure is under 60, the weight is all shifted to the back of the bike. Could cause some strange handling.

Posted

6 to 10 lb is about the range you should see.

 

If you have progressive springs in front forks, you do not need any air pressure in the front.

Posted
My 83 venture seams to want to vear off from side to side going down the road at any speed. All I can find is the front pressure keeps going up to 22 psi. I set the guage to manual but it keeps going to auto and build pressure. Would this be the problem of the weaving or is it some thing else.

The scoot went on craigslist the first of the week. Going to down size.

 

Lots of things could cause the weaving back and forth. Fork pressure isn't one of them. Bad/loose bearings, weak springs, gummy fork oil, are a few. But since you're going to find it a new owner, I wouldn't stress over it. However... if the weaving is the reason you're selling, I suggest you service the forks and put in Progressive springs. Once you've done that, I have a fork brace upgrade that will really help in handling.... On the CLASS glitches do a resolder and clean the connectors.

Posted

I agree with Condor, doubt it's the fork pressure. Generally raising the front of a bike makes it more stable, while lowering makes it turn quicker.

 

Jeremy

Posted
As the '83 had problems with the frame cracking........wouldn't that cause some issues with the handling?

 

Just depends on the severity of the crack. Haven't heard of one cracking for a couple of years now....

Posted

what about tire pressure. This varies dependng on what brand of tire you run. I believe Dunlop and Bridgestone and Metz. Recommend about 36psi. Avon about 42. If your forks or tire psi are pumped up too high...the frt. tire will track every crack in the road and feel tipsy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...