Shipper Posted March 25, 2010 #1 Posted March 25, 2010 Almost got swacked twice yesterday. One from a lady that swerved into my lane and the other from a guy that just pulled out in front of me. How many lights do we need? I run with my high beams on in the daytime, but I'm thinking "flashing lights" or something especially in high traffic areas. Can you fix the front turn signals to flash on a RSTD? What is the best light setup? Thanks for any suggestions!
frogmaster Posted March 25, 2010 #2 Posted March 25, 2010 Sorry to hear about this... but unfortunately it is happening more and more Do a Search for the word "Modulator" there you will find some answers. Added mine last week
Shipper Posted March 25, 2010 Author #3 Posted March 25, 2010 Sorry to hear about this... but unfortunately it is happening more and more Do a Search for the word "Modulator" there you will find some answers. Added mine last week Just ordered the "VisiPath sS75H4". Is this the one you just installed? The reviews indicated it would work; although, some of the forum comments said it didn't work on a 1st Gen bike. Did you do the brake light also?
Mikealiasmike Posted March 25, 2010 #4 Posted March 25, 2010 I did both front and rear, have had many folks say they saw lights modulating well ahead of needing to brake suddenly. As for the back brake I bought the "Back Off" unit. Really gets the attention of folks following too close. My opinion in this matter and it does differ from some is whatever it takes to get folks to see me then so be it including modulating lights. Got a T-shirt bright orange road construction type the reads "Can you see me now Dumb As&" Ride safe and God Bless. Mike
aharbi Posted March 25, 2010 #5 Posted March 25, 2010 You don't say, but I noticed a big difference with people pulling out in front of me when I added the passing lamps.
Dave77459 Posted March 25, 2010 #6 Posted March 25, 2010 You don't say, but I noticed a big difference with people pulling out in front of me when I added the passing lamps. You mean more people pulled out when you added the lamps? Dave
frogmaster Posted March 25, 2010 #7 Posted March 25, 2010 (edited) Just ordered the "VisiPath sS75H4". Is this the one you just installed? The reviews indicated it would work; although, some of the forum comments said it didn't work on a 1st Gen bike. Did you do the brake light also? Shipper I went with the Plug-N-Play from KISAN. On the back I added a 15" LED just under the trunk last summer. My riding buds says it really jumps out and was a nice addition. Good Luck and Ride like they are all out to GET YA!!! Edited March 25, 2010 by frogmaster spelling
brainfart Posted March 25, 2010 #8 Posted March 25, 2010 on the trunk - i added the "knight rider led light bar" last year.....from Custom Dynamics. VERY visible and it works great! less than $30... for the front - i installed dual air-horns from JC Whitney. compressor mounts in place of the regualr horn, air horns - one under each floorboard... i'm not a peg-scraper....
Shipper Posted March 25, 2010 Author #9 Posted March 25, 2010 Good Luck and Ride like they are all out to GET YA!!! In both the tight squeezes I remembered that I accelerated to get out of the squeeze. Guess if (or when) I wipe out it'll be from accelerating instead of braking. At least there's no danger of my brakes locking up!
midnite Posted March 25, 2010 #10 Posted March 25, 2010 [. Got a T-shirt bright orange road construction type the reads "Can you see me now Dumb As&" Ride safe and God Bless. Mike Where'd you get the shirt, I want one of them:big-grin-emoticon:
hig4s Posted March 26, 2010 #11 Posted March 26, 2010 I added LED front turn signals that are on bright all the time and go off to signal.. And I added passing lamps.. I noticed people give me more room now. Of course you still have to watch for the morons that wouldn't notice a Mack truck riding next to them. for the rear I added a full LED tail/brake light and a license frame with red LED brake/tail lights on the top and bottom, and amber LED signals on either side. Left my stock rear signals just that, stock.
Brake Pad Posted March 26, 2010 #12 Posted March 26, 2010 Almost got swacked twice yesterday. One from a lady that swerved into my lane and the other from a guy that just pulled out in front of me. How many lights do we need? I run with my high beams on in the daytime, but I'm thinking "flashing lights" or something especially in high traffic areas. Can you fix the front turn signals to flash on a RSTD? What is the best light setup? Thanks for any suggestions! This work really well, with the S***Heads in South Florida
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now