starkruzen Posted March 22, 2010 Posted March 22, 2010 I wan't to purchase the Kuryaken Long Horn highway pegs but I don't know what clamps size to order. I want to install on the engines guards just in front of the front floor boards. ANyone know for my 07 RSTD? Thanks:doh:
SilvrT Posted March 22, 2010 Posted March 22, 2010 I wan't to purchase the Kuryaken Long Horn highway pegs but I don't know what clamps size to order. I want to install on the engines guards just in front of the front floor boards. ANyone know for my 07 RSTD? Thanks:doh: I'm pretty sure it's a one inch clamp
frogmaster Posted March 22, 2010 Posted March 22, 2010 I'm pretty sure it's a one inch clamp BINGO we have a Winner yes 1" for 2nd Gen.
CMIKE Posted March 22, 2010 Posted March 22, 2010 If they slip a little after you install them...becareful not to tighten them up to tight. For some reason mine did. Cut shim out of a beer...I mean coke can and put it inside the clamp. This made mine solid as a rock.
barend Posted March 22, 2010 Posted March 22, 2010 Can I interest you in a set of boards, see the classifieds.
new guy Posted March 22, 2010 Posted March 22, 2010 You can get them on ebay for $120.00 with free shipping. The sellers name is biker-trends the item # is 230382965479 not sure how much they are through Kuryakyn. good luck Pat
SilvrT Posted March 22, 2010 Posted March 22, 2010 BINGO we have a Winner yes 1" for 2nd Gen. kewl!!! ... what's the prize? is it chrome? when do I get it?
Dave77459 Posted March 22, 2010 Posted March 22, 2010 When I bought mine, I bought the "Longhorn Offset Peg Mounts with 1 Inch Clamps" with separate pegs (I got the "Switchblade Footpegs"). That is, the mounts were sold separately from the actual pegs. Dave
LilBeaver Posted March 22, 2010 Posted March 22, 2010 If they slip a little after you install them...becareful not to tighten them up to tight. For some reason mine did. Cut shim out of a beer...I mean coke can and put it inside the clamp. This made mine solid as a rock. I read about a lot of people having this problem, and I actually didn't have an issue with the slippage at all. I think the diameter of the crash bars vary as you move down the bar - which may explain why some do and some don't have issues with the slippage.
rickardracing Posted March 22, 2010 Posted March 22, 2010 I ordered 1" Long Horn Offsets off of Ebay last Thursday. I expect them to be in tomorrow. I also bought 1" clamps for the brace.
BradT Posted March 23, 2010 Posted March 23, 2010 This probably has been asked 100 times Now 101 times Congrats on getting a set they are nice looking Pegs Brad
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now