Time to tap into the vast resource that is VR.org!

[Guest human4m]

I've been in and out of the threads, and noticed a handful of members do some fabrications... Here's my request...

 

First; I'm a cheap S.O.B. - If I can find a way to do it just as good, for less cost- I will.

 

Second; I don't make much $$ to begin with, so I like to keep what I can.

 

Third; I'm cheap.

 

As I was... My 97 RSTC doesn't have the fancy airbox the 2nd Gens have, and there's NOTHING between the cylinders to even mock a filter housing. I think it looks funny. I've seen the Mini-Teardrop covers online:

(http://www.cruisercustomizing.com/detail.cfm?model_ID=40&Category_ID=108&manufacturer_ID=167&product_ID=26174&related=short)

 

My question is, if anyone has these, or something similar, can SOMEONE please make a bracket that mounts the same way, or maybe even make the whole cover? I can't stand the empty space, and I'd love to find a way to mount something there, even if it's an empty beer can.

 

Am I asking too much?I Just can't justify spending $150 on a blank cover.

[mini-muffin]

Ok first of all you aren't cheap we here refer to that as being frugal. Anyway that's why we actually have folks that make stuff. I'm sure someone might be able to come up with something for you.

 

Margaret

[Sleeperhawk]

Ok first of all you aren't cheap we here refer to that as being frugal. Anyway that's why we actually have folks that make stuff. I'm sure someone might be able to come up with something for you.

 

Margaret

 

Naw, he is cheap

[Squidley]

Patrick,

Are you talking about the space right behind the radiator and in front of the fwd cylinders? If you can get a few close up shots and post them we might be able to come up with something.

[Guest human4m]

Patrick,

 

Are you talking about the space right behind the radiator and in front of the fwd cylinders? If you can get a few close up shots and post them we might be able to come up with something.

 

No, it's the space between the rear and front cylinders. Where a V-Twin would normally have the air cleaner assembly on one side, and a horn on the other.

 

http://www.baronscustom.com/images/products/20070110161245.jpg