YamaDuck Posted March 15, 2010 #26 Posted March 15, 2010 Does this defeat the pupose of having the crash bars. Crash Bars are design to give and come around to protect the engine, with the supports there is no flexiabilty. I don't think the engine guards on the RSV are adequate. You can be sitting still and drop the bike and do a lot of damage.
Leadwolf56 Posted March 15, 2010 #27 Posted March 15, 2010 Got mine today. Along with the horn wiring harness. As always Larry's work is great.
LilBeaver Posted March 15, 2010 #28 Posted March 15, 2010 Got mine today. Along with the horn wiring harness. As always Larry's work is great. Wow, that was quick
Leadwolf56 Posted March 15, 2010 #29 Posted March 15, 2010 Wow, that was quick I was one of the "requesters". Larry does a real nice job fabricating things. He's also made me a cooler rack for my camper trailer.
YamaDuck Posted March 15, 2010 #31 Posted March 15, 2010 Got mine today. Along with the horn wiring harness. As always Larry's work is great. Oh sure rub it in. I didn't check in the 3 hrs it took to sell out and you did. Gee thanks. Seriously Larry why don't you make a list. I had mentioned I wanted two sets but there are so many people wanting them I can settle for one set until you get caught up and I can get the other set later. I wish you would make a list and I will be glad to pay in advance (it could help by the materials) that way I would not miss it again when you post. I'm sure a lot of other people would like for you to start a list also. Harry
GaThumper Posted March 16, 2010 #32 Posted March 16, 2010 If there's a list, please add me to it, too! Otherwise I'll watch for the next post. Thanks, James
Carbon_One Posted March 16, 2010 Author #33 Posted March 16, 2010 If there's a list, please add me to it, too! Otherwise I'll watch for the next post. Thanks, James I'll keep track of requests here and fill orders in as i go down from the posts. Larry
YamaDuck Posted March 16, 2010 #34 Posted March 16, 2010 I'll keep track of requests here and fill orders in as i go down from the posts. Larry THANKS!
LilBeaver Posted March 19, 2010 #35 Posted March 19, 2010 Got mine today, and my clamps should be here tomorrow or Monday at the latest. Can't wait to get them on as I don't like the way my bars flex everytime I throw my feet up. Thanks again for a great product as well as great instructions as to how to set it up
Mariner Fan Posted March 19, 2010 #36 Posted March 19, 2010 Got mine as well today. I'll be putting them on this weekend. Thanks Larry!
Carbon_One Posted March 19, 2010 Author #37 Posted March 19, 2010 Ok I built up an additional 24 pairs of the braces and have updated the ad from post 1. The following folks who requested to be on the short list have dibs: YamaDuck, Skid, Mike Wa, Red Rider, Kite Squid, divey, jvbailey3, ruffy, FreezyRider, rdhc, Ga Thumper,. Did I miss anyone? Larry
KiteSquid Posted March 19, 2010 #38 Posted March 19, 2010 I just paid for mine and ordered the P-clamps from Dennis Kirk. WOOOOO HOOOOOO
Guest divey Posted March 19, 2010 #40 Posted March 19, 2010 I just paid Larry. Thanks again for this. If the shipping costs to Canada are more, just let me know. Doug
YamaDuck Posted March 25, 2010 #42 Posted March 25, 2010 Got them today Larry. They look great! Thanks for the quality work and great service. I also left you a feedback.
jvbailey3 Posted March 25, 2010 #44 Posted March 25, 2010 Paid for mine too. Looking forward to getting them.
Aussie Annie Posted March 26, 2010 #45 Posted March 26, 2010 Set for me please Larry. I place a lot of pressure on the right side foot rest due to the stiff leg. Have sent you a PM
Carbon_One Posted March 26, 2010 Author #47 Posted March 26, 2010 To all customers: Now that a few of you have gotten them I would like for you to give me some feedback on your experinece of the install as well as pics of the rear tab where you've drilled the hole in the footrest brackets. I've changed the location and design of these braces over what I did to my bike 3 years ago and didn't want to have another hole in my footrest brackets. Either pm me or drop me an e-mail, especialy if sending any pics. Much thanks in advance folks. Larry
Carbon_One Posted March 31, 2010 Author #48 Posted March 31, 2010 I've updated pics in the first post & at the ad in the 2nd gen classifieds. Larry
bamico Posted April 7, 2010 #50 Posted April 7, 2010 I know there's plenty of good press out there for Larry's product, but wanted to add my 2 cents. Got them installed tonight. I've got the Kuryakyn Longhorn pegs on the bike and before Larry's mod, they really flexed the crash bars. Now with the mod, they're solid as a rock. Rt one was easy, Left was harder, definitely had to disconnect the shifter arm and shifter mounting bracket from the floorboard bracket. Once that was done, there was enough room to squeeze in the pan head screw. Tight fit on that side! I can see why he chose the hardware he did. Directions were pretty clear and the posted pictures will get you the rest of the way. Thanks again, Larry for making such a great product available! Have a great day. Bob
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now