PCW Clutch Kit HELP!!!

[Whitlow]

Can someone answer and help me with the PCW Clutch Kit Install. I started the job and where there is that wire that holds the metal plate and fiber disc a smaller OD type washer. In the very back it looks like just a smooth machined surface but also maybe a larger OD type washer. The instruction blew over into some old oil and can't read them. Help me from where I'm at please.

Thanks

[midnightventure]

Here is a link to where another member has the service manual available.

http://www.venturerider.org/forum/showthread.php?t=1828

[jburrell]

I had PONCH help me and all we did was remove the half disc and the wire. Remove the wire completely (throw it away)and the half disc then install the replacement full disc and then all the other disc on top of that then new stronger spring and your done. If the metal disc are blued or work sand them in cross hatch pattern and reinstall in order they came out. Remember to match the notches when reinstalling them. Many here will take your phone call just look under VR assistance.

James