starkruzen Posted January 15, 2010 Share #1 Posted January 15, 2010 Lets all post pictures of our bike so we can see what wonderful mods you done! Link to comment Share on other sites More sharing options...
pegscraper Posted January 15, 2010 Share #2 Posted January 15, 2010 (edited) Well, it's not a TD but it is an RS, early model. And it has a pile of add ons and mods, some obvious, but many less so. And actually, I notice a few things missing in this picture. Not shown - I welded nuts in the ends of the handlebars so I could attach the RSTD bar weights, then I attached probably 18" long fringe from Kuryakyn into the ends of the weights, also some K highway pegs. Edited January 16, 2010 by pegscraper Link to comment Share on other sites More sharing options...
bj66 Posted January 16, 2010 Share #3 Posted January 16, 2010 Here is mine, Barons slash cuts luggage rack from tour classic Kuryakyn pegs Bakup seat rest Shark am/fm tuner with 100 amp booster Dunlop 404 wide white walls Red bullet turn signal lenses (added today- thanks eagleeye for the info) Link to comment Share on other sites More sharing options...
thumper1 Posted January 16, 2010 Share #4 Posted January 16, 2010 just an old 97 tour deluxe but we really like it. put on the ultimate seat and trunk and increased it about 300% on the comfymeter. heart attack in august got me to thinking about selling but not sure yet. going in another heart cath next friday, guess we'll see what comes of that. ride safe and be cool. thumper1 Link to comment Share on other sites More sharing options...
pegscraper Posted January 16, 2010 Share #5 Posted January 16, 2010 Red bullet turn signal lenses Where did you get those? Link to comment Share on other sites More sharing options...
starkruzen Posted January 16, 2010 Author Share #6 Posted January 16, 2010 Great picture folks. I like them "titty lens covers":smile5: Link to comment Share on other sites More sharing options...
bj66 Posted January 17, 2010 Share #7 Posted January 17, 2010 Where did you get those? Eagleeye gets the credit for these, they are H-D stock diameter lenses, 83mm i think, not sure. Anyway you can find them on this site http://www.crazybikerusa.com/. Take off your lens, and the trim ring, you have to reverse trim ring around and the bullets should fit. If the trim ring isnt a separate piece, i dont know if they will fit. Hope this helps. By the way cost is about 20 bucks. Link to comment Share on other sites More sharing options...
naturbar Posted January 17, 2010 Share #8 Posted January 17, 2010 07 rstd....hoppe fairing w/stereo, chrome lowers, kuryakyn pegs, butler seat mods,detachable tour pack,wild pig hd mufflers...... Link to comment Share on other sites More sharing options...
silverdeer0454 Posted January 17, 2010 Share #9 Posted January 17, 2010 I have an 05 RSTD. 1. Khrome Werks mufflers - turn down tips 2. 12V plug in for my GPS 3. Bracket to carry a 3X5 American flag for PGR missions. 4. Driver's backrest Link to comment Share on other sites More sharing options...
wes0778 Posted January 17, 2010 Share #10 Posted January 17, 2010 Not a TD, but a TCII Baron engine guards Stebel air horn LED Tail/Brake light WWW front tire Venture saddle bags Generic aftermarket trunk Gonna paint it to match, mañana... Link to comment Share on other sites More sharing options...
starkruzen Posted January 17, 2010 Author Share #11 Posted January 17, 2010 That's all we got? No other RSTD's out there? Man we are weak! Link to comment Share on other sites More sharing options...
Dave77459 Posted January 18, 2010 Share #12 Posted January 18, 2010 That's all we got? No other RSTD's out there? Man we are weak! Dude, some of us have been out riding, rather than cruising the board. LOL! First mod: the luggage rack http://farm4.static.flickr.com/3159/2764427486_a072bf34f7.jpg Passing Lamps, daughter not included. http://farm4.static.flickr.com/3066/2831465795_181a9626a7.jpg Air horn http://farm4.static.flickr.com/3228/3390568060_0beacb3ca8.jpg Made some tool-free luggage bolts http://farm4.static.flickr.com/3092/3149978753_39dd1e77fc.jpg Passenger foot pegs http://farm4.static.flickr.com/3344/3445876735_5ff26675af.jpg Switchblade footpegs with longhorn brackets http://farm4.static.flickr.com/3541/3491477368_2ddbd60646.jpg Auxiliary Fuse box under the seat http://farm4.static.flickr.com/3542/3660208718_1eac068e6f.jpg H-D Roadking Pipes (Note the lift adapter with legs -- crucial purchase!) http://farm3.static.flickr.com/2644/3691215573_0aa375d98c.jpg Re-wired passing lamps to use relay http://farm3.static.flickr.com/2463/3893395939_b4826db2d7.jpg My GPSMap 60CSx http://farm4.static.flickr.com/3443/3935815166_acd18b3b79.jpg Tail light running/brake lights (see the LED donut on the left stalk)? http://farm4.static.flickr.com/3622/3941031059_62174fd7e7.jpg Vented the filler neck http://farm4.static.flickr.com/3393/3607786358_f906338aeb.jpg Flag staff and flag http://farm3.static.flickr.com/2542/4079762721_fee10f4fd6.jpg Sheepskin from IKEA http://farm4.static.flickr.com/3456/3927254595_bce15ab8c8.jpg Beauty shot from today. My wife and I rode 110 miles in gorgeous weather. Not bad for January. http://farm5.static.flickr.com/4045/4283016857_3ac7c1813b.jpg Link to comment Share on other sites More sharing options...
hunter 1500 Posted January 18, 2010 Share #13 Posted January 18, 2010 Here's a link to a thread about modifing the fairing for my bike. Alos made parts for the lowersthat are getting cleaned up. Also added Kury hyway pegs Dragon fly vents for the fairing Mustang seatI located my Sirius tunner in the saddlebag and I'm having the fairing painted this winter and when it is done I will add anouther picture of the finished bike.http://venturerider.org/forum/showthread.php?t=41001 Link to comment Share on other sites More sharing options...
gunkylump Posted January 18, 2010 Share #14 Posted January 18, 2010 Lets all post pictures of our bike so we can see what wonderful mods you done! I've got a 96 with a few mods, no pics right now, it's somewhat tore apart being cleaned up and adding this and that. It's got over 123,000 k's on it, so far. I've got Jardine forward controls coming in this week that I just won on ebay, studded and concho'd the saddlebags, tinted the windshield, Kuryakin grips, front fender rail, skull mirrors, polished wind deflectors, solo seat rail, Mustang leather rear fender bib, saddle bag guard rails, stebel air horn, 4" pull back risers, yamaha driving lights and covers, LED tail light from custom dynamics, fringed and concho'd mud flaps, chrome carb covers, solo seat rail, studded and concho'd seat.......I'll post some pics when I get it all back together and cleaned up a wee bit. I rode this bike over 5 years, bought it brand new in 98, sold it to a friend of mine. He rode it for a while, then traded it in. I tried to get the dealer who got it to tell me who bought it, I always wanted it back, all he would tell me was the general area of the new owner. Well, 5 years goes by, and I find in on the internet one night, for sale. Called the owner, and the rest they say, is history. gunk:bowdown: Link to comment Share on other sites More sharing options...
Lone Eagle Posted January 18, 2010 Share #15 Posted January 18, 2010 I need to update couple of my "safety additions" - but my pictures are in my gallery. Link to comment Share on other sites More sharing options...
jemorrisonjr Posted January 18, 2010 Share #16 Posted January 18, 2010 Where do I start....... Venture Pillow top seats, Venture Tour pac, Moto-lights, Passing lamps, Grill cover, Trailer Hitch, Hwy Pegs, Barons slash cut pipes, Saddle bag top rails, Saddle bag side rails, Carb covers, Buckeye stator, Mirrors, fender tips, Pictures to follow Link to comment Share on other sites More sharing options...
rdhc Posted January 20, 2010 Share #17 Posted January 20, 2010 Hoppe Fairing, Baron Bag Slash Pipes, Mustang seat Link to comment Share on other sites More sharing options...
bobbyduck Posted January 22, 2010 Share #18 Posted January 22, 2010 Jardine Billet wheels, Avon WWW tires, Radio Caddy fairing with Aquatic AV stereo, Starcom1 digital intercom, Ultimate seat, BUB slip-ons, Dyna ignition module, Race-Tech / Baron's improved and lowered front end, Works Performance rear suspension, Baron's billet floor boards, HD TourPak with Dragonfly 6.5 inch speaker pods, Flanders handlebars, a few Kuryakyn goodies. Oh and an Ultra Star emblem because I couldn't resist.... Link to comment Share on other sites More sharing options...
TDbiker Posted January 23, 2010 Share #19 Posted January 23, 2010 No pics (bike is put up for the winter).... '05 RSTD Red/Black, Mustang seat w/ driver backrest, passing lamps, run/turn/brake controller, chrome fender tips, Stebel horn, Kury ISO grips, saddle bag chrome side rails, luggage rack, Clearview tinted windshield. Next up is Kury highway pegs, Flanders handlebars. Link to comment Share on other sites More sharing options...
TDunc Posted January 23, 2010 Share #20 Posted January 23, 2010 No pics except avatar right now. Lots of little extras and still growing as wallet receives input. Mustang studded seat with backrest, kury grips, passing lights, saddlebag rails, a few extra chrome covers and bag slash pipes. Nothing major just a bunch of fun working on it. Future: -Add led "back off" lights to the back... tired of hearing tire squeals when I don't run through "pink" lights. -Sewing off-white leather tank cover and tank bag. -trailer hitch/trailer -detachable trunk oh yeah ---- lots more chrome Link to comment Share on other sites More sharing options...
clydegator Posted January 24, 2010 Share #21 Posted January 24, 2010 here's mine Link to comment Share on other sites More sharing options...
clydegator Posted January 24, 2010 Share #22 Posted January 24, 2010 a couple more pics, hey starkruzen nice bike looks like mine in lantana marty Link to comment Share on other sites More sharing options...
gunkylump Posted January 24, 2010 Share #23 Posted January 24, 2010 I've got a 96 with a few mods, no pics right now, it's somewhat tore apart being cleaned up and adding this and that. It's got over 123,000 k's on it, so far. I've got Jardine forward controls coming in this week that I just won on ebay, studded and concho'd the saddlebags, tinted the windshield, Kuryakin grips, front fender rail, skull mirrors, polished wind deflectors, solo seat rail, Mustang leather rear fender bib, saddle bag guard rails, stebel air horn, 4" pull back risers, yamaha driving lights and covers, LED tail light from custom dynamics, fringed and concho'd mud flaps, chrome carb covers, solo seat rail, studded and concho'd seat.......I'll post some pics when I get it all back together and cleaned up a wee bit. I rode this bike over 5 years, bought it brand new in 98, sold it to a friend of mine. He rode it for a while, then traded it in. I tried to get the dealer who got it to tell me who bought it, I always wanted it back, all he would tell me was the general area of the new owner. Well, 5 years goes by, and I find in on the internet one night, for sale. Called the owner, and the rest they say, is history. gunk:bowdown: Tried to add a pic of how the bike used to look, way back 8 years ago. Beth and I weren't married at the time, but were on a small vacation. gunk:hihi: Link to comment Share on other sites More sharing options...
Dave77459 Posted January 25, 2010 Share #24 Posted January 25, 2010 (edited) At the maintenance day yesterday, we removed the tank badges. Pics, naturally. http://farm3.static.flickr.com/2755/4301719153_07fa14cb90.jpg http://farm5.static.flickr.com/4013/4302465766_151b3e912f.jpg Last week, for reference: http://farm5.static.flickr.com/4045/4283016857_3ac7c1813b.jpg Edited April 20, 2010 by Dave77459 Broken image Link to comment Share on other sites More sharing options...
kingtut Posted January 29, 2010 Share #25 Posted January 29, 2010 07 rstd....hoppe fairing w/stereo, chrome lowers, kuryakyn pegs, butler seat mods,detachable tour pack,wild pig hd mufflers...... Hey Naturbar . . . did you go directly to Hoppe for the upper fairing . . . and how much does one have to fork out? Also, if I ordered a Hoppe for my 2006 RSTD (which has a light bar), will any modifications have to be done to install it? Celebrate Life : Live Christ Kingtut Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now