Quick Antenna Question

[rumboogy]

OK....I am getting ready to swap my two antennas out.

 

I went out there and got ready to swap them out (should be easy right)...and now I see 3 wrench points (flat spots)...

 

I tried very lightly to turn all 3, but I am afraid I might damage the antenna if I twist off the wrong one...

 

So which one is it...the top smaller wrench point, the middle or the largest one being the lower one.

 

Thanks,

 

Wally

[Color01]

you have to unscrew the antenna from the base.

 

this is how my antenna looked liked when I took mine apart.

 

http://i15.photobucket.com/albums/a372/color01joy/P1020077.jpg

http://i15.photobucket.com/albums/a372/color01joy/P1020079.jpg

http://i15.photobucket.com/albums/a372/color01joy/P1020078.jpg

[Bummer]

Mine looks somewhat different. This one is from an '06. If yours looks like this:

 

Leave the right most piece in place. It's bolted on from under the support. Hold it stationary with a wrench above the support.

 

The center piece threads onto the left most piece. Put a wrench on either the folder or the middle set of flats. They should unscrew together as in the center photo.

[Color01]

my 03 midnight venture has the black plastic base.

[Bummer]

Who says Yamaha never changes anything.