Jump to content

Recommended Posts

Posted

does anyone know about the difference in gearing between a kph vs mph speedometer.

i have a kilometers per hour unit that the odometer went belly up and Bongobob was kind enough to give me a unit that is miles per hour. the gears inside both units look identicle, is the front wheel gearing different or is the gearing in the speedos different?:think:

Posted

Can't say I've seen just a Kilo type speedometer. The ones here in the states have both on one speedometer. The kilos are sort of in the background but there.

BOO

Posted

Could it be the same internally, but with different graphics on the front of the speedo.

 

There was a link to a picture on here at one time of a Kilo unit but it is gone now.

 

Gary

Posted
Could it be the same internally, but with different graphics on the front of the speedo.

Gary

 

Scott - While I don't know for sure, I think the same as Gary. In fact, I have seen vehicles with both miles and kms on the speedo dial, so you could read whatever scale you preferred and, for example, 100km/hr was at the same point on the speedo scale as 62 mph.

Posted
Could it be the same internally, but with different graphics on the front of the speedo.

 

There was a link to a picture on here at one time of a Kilo unit but it is gone now.

 

Gary

 

Of course the main, trip counters would be in miles & not Km + reversed graphics. :2cents:

Posted

but the odometer counts differently. 100 kilometers equals 60 miles.

 

can one of our USA members check something for me. unscrew the speedo cable, rotate the front tire and count how many times the speedo gear turns for one rotation of the front tire.

 

thanks

Posted

The Graphics on the dash face are silk screened to match the Kilo's per hour, the mechanical unit is the same except for the odo and trip meter in the Metric unit.

Earl

Posted

One rotation of front tire is almost exactly 3 revolutions of the speedometer cable at top. This is American format bike (MPH)

 

 

How did he do this so quickly you ask?

 

Picture below is of my once nice looking 1st gen all decked out for its winter rework.

 

Gary

Posted

How did he do this so quickly you ask?

 

Picture below is of my once nice looking 1st gen all decked out for its winter rework.

 

Gary

 

Looks like you have a project for the winter. Have fun.

 

BRad

Posted
One rotation of front tire is almost exactly 3 revolutions of the speedometer cable at top. This is American format bike (MPH)

 

 

How did he do this so quickly you ask?

 

Picture below is of my once nice looking 1st gen all decked out for its winter rework.

 

Gary

 

 

You find what you were looking for in there yet?? Be a good time to change the plug wires.:confused24:

Posted

Gary, you didnt have to do that just for me:rotfl:, but thank you:thumbsup2:

 

One rotation of front tire is almost exactly 3 revolutions of the speedometer cable at top. This is American format bike (MPH)

 

 

How did he do this so quickly you ask?

 

Picture below is of my once nice looking 1st gen all decked out for its winter rework.

 

Gary

Posted

Maybe I'm wrong but speed is speed, no matter how you graduate it. Some bikes have both scales on the same speedometer, so in order for both to be right the internal gearing would have to be the same wouldn't it?

Posted

The speed is the same... just switch out the faces (quite easy actually!) Be sure to remove both screws holding the speedo mechanism in place and then pull it out, minding the cutout in the face to guide the temp needle stem through. As for the odometer, I'm sure you could remove the good working one and install it on the new "good" speedometer.

Posted
does anyone know about the difference in gearing between a kph vs mph speedometer.

i have a kilometers per hour unit that the odometer went belly up and Bongobob was kind enough to give me a unit that is miles per hour. the gears inside both units look identicle, is the front wheel gearing different or is the gearing in the speedos different?:think:

 

Thats a darn good question, I hadnt thought about that. I have issues with the gear on the front wheel acting up once in a while so i got a different one shipped up here to replace mine. I guess i had better do some counting and checking before i do the swap. Thanks for the heads up!!

 

Brian

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...