Carbs and Valves in North Texass

[V7Goose]

OK, who wants to get together in the Dallas/Fort Worth area sometime in January to check float levels and/or valves? I already have one guy who is interested, but we have not set a date yet - if there are two or three others, maybe we can find a date that works for everyone? Let me know if you are interested,

Goose

 

Another offer: If you just want someone to do the work, instead of learning how to do it yourself, I'll do that too. I'll set floats and idle mixture for $150, valves for $300, or both together with new plugs for $375 (plus any parts needed, such as gaskets).

Edited December 9, 2009 by V7Goose

[Squidley]

Get back from Vacation and your already going back to work....your a glutton for punishment. If nothing else and we can make it I'd love to come up and see you work

[LilBeaver]

I'm interested. BUT, our weather here is not quite as nice as DFW, so that is going to have to be a factor for whether I could make it or not.

 

I don't know that I need my floats set (but based on what you have said Kent, they are probably way out of spec), but I'm due for a valve adjustment check.

 

I definitely want to learn. I have rebuilt car motors, but have not torn into a bike before...

 

I'll stay tuned for sure.

[V7Goose]

Man,I ain't back yet - gonna be sittin' here enjoying the cerveza and tequila until Monday! But thought I'd get the post started to see if there was any interest with enough advance notice to maybe actually plan a date instead of reacting.

 

And you are more than welcome to join us, even if all ya wanna do is some bench racing and knock back a cool one or two. We have an open room - Hope to see ya,

Goose

[Jerry W]

Would love to make it, but I already have committments for the entire month of January. If you do it again sometime, maybe I could make it. Even if the weather is bad in the panhandle, I have a trailer.

[Eagle77]

I would certainly be interested in this. I would really like to learn more about my bike and learn to do this work but I might want you to do it this time with me assisting. In my past life I have done quite abit of work on bikes but that was in the 70's these are a lot different. Sounds like a fun day

Gene

[V7Goose]

Alright all - I didn't see much interest in this when I first posted it, but the holidays are past now and we are going to be doing some work on bikes this Saturday (tomorrow, around noon), but mostly next Saturday 1/23. If you are interested you are welcome to come by too.

Goose

[short-haul]

Where will you be and what times:think: . If the weather not to bad :snow:I will ride over to meet you 01-23-10 .Colleyville is a lot closer the Rock Port. can't this saturday as mine is still apart.I live on the NW side of Fort Worth