Need help with trunk

[scooter45]

The part that holds the lid up is loose, The top screw you can get to but how do you get to the bottom screw

[Yamaman]

I hope we get some replies on this. I have the same problem.

[rod]

Mine fell off so I just removed the whole thing. Rod

[V7Goose]

You have to pop the circlip off the pin that holds the strut to the lid. With the strut loose, you can pivot it to the rear and access the other screws. Of course, you have to take the plastic cover off the bottom end, too (just one screw for that).

Goose

[scooter45]

Hope I can figure it out

[davecb]

You have to pop the circlip off the pin that holds the strut to the lid. With the strut loose, you can pivot it to the rear and access the other screws. Of course, you have to take the plastic cover off the bottom end, too (just one screw for that).

Goose

 

 

 

Yup, you gotta take everything apart to get to the screw and then you have to be careful on how much you tighten it. If to tight, it won't swing back up to reinstall everything. Just keep playing with it and you will get it right....