Floor Board Foot pegs

[starkruzen]

I seen some pics on this site with bikes that had "what looked to be" highway pegs mounted on the floor boards. I would like to get some highway pegs for mine but I'm verticle challanges with a 30" inseam. Any advise would be helpful.

 

Thanks

 

Mark

[Ponch]

[ame=http://www.venturerider.org/forum/showthread.php?t=41498]Highway pegs - VentureRider.Org[/ame]

[Freebird]

Many of us here use the KuryAkyn pegs. They have an arm that can be rotated for different lengths. Here are a couple of options.

 

Most of us use this method.

http://www.venturerider.org/forum/showthread.php?t=39650&highlight=Kuryakyn

 

 

Here is one that was recently posted that mounts a bit differently.

http://www.venturerider.org/forum/showthread.php?t=41498&highlight=Kuryakyn

[YYZ]

Here is my 2 cents for what it's worth. I tried some that clamped to the floor boards but because of the heel shifter my foot was almost trapped in. I did'nt feel safe at all. I'll look for some that clamp to the engine guard in the spring.

[birin]

How about this?

 

http://www.classiccruiser.com/product.asp?item=706920

[Cougar]

That's Kinda neat Birin

[ManWithAVision]

I have the Kuryakyn pegs that mount on the crash bar and they work great, but I had to drill and tap them and the bar and install a stainless steel bolt. It just wasn't possible to get them tight enough to stop them from twisting on the bar if I applied too much foot pressure. This fix solved the problem and now I spend a lot more time with my feet up on the pegs than I do with them on the floorboards.

[Wanderer]

Here's the new eBay @ 109.00 that's the bomb.

[Wanderer]

How about this?

 

http://www.classiccruiser.com/product.asp?item=706920

 

Have you used them? This is kinda what I been lookin' for.

[Art708]

I am using Star Pegs on mine. They work just fine and are very inexpensive.

[birin]

Have you used them? This is kinda what I been lookin' for.

 

I have not used these - but with my short legs I feel these would wok best for me. When I simply place my boot heel in different positions on the existing floor boards _ i feel it is more comfortable than the engine guard peg

 

I have attached another option as well

 

 

http://www.cruisercustomizing.com/detail.cfm?model_ID=0&Category_ID=6&manufacturer_ID=6&product_ID=7600

[tim44]

I got these from jc whitney for $45 I'm thinking. They bolt to the crash bar nicely.

 

http://i254.photobucket.com/albums/hh105/deeleppek/Image005.jpg

 

http://i254.photobucket.com/albums/hh105/deeleppek/Image006.jpg