Sheradan Posted November 4, 2009 #1 Posted November 4, 2009 What is the best way to do a twin antenna setup on a 1st gen? I have them both with extra mount. Should I run 1 antenna to the CB and eleminate the splitter, and the other directly to the stereo? Or go 2 into 1, then into the splitter?
utadventure Posted November 4, 2009 #2 Posted November 4, 2009 The splitter is a challenge for the CB to function well. When I did mine, I ran an antenna to each the radio and the CB and eliminated it. It made matching the CB antenna to the CB much easier. Dave
saddlebum Posted November 5, 2009 #5 Posted November 5, 2009 The splitter is only there to be able to run two devices off of one antenna . It is actually a compromise. A separate antenna for each (and get rid of the box ) is an improvement to say the least.
warthogcrewchief Posted November 5, 2009 #6 Posted November 5, 2009 How would one remove the splitter and install two new anntenna wires? I've got everything apart right now for my rebuild as I do the body work, so it should be fairly easy as I begin to rebuild everything. Thanks, WHCC
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now