wakers Posted October 14, 2009 #1 Posted October 14, 2009 I am ordering items for my winter projects and need some help. I have read the threads involving passing lamps and understand how to install, but here is where my dumbness comes in. I have an 06 beautiful black tour deluxe with a straight light bar which the turn signals connect horizontal at the ends. I want to add passing lamps but am confused. Every site I look at to order the lights and mounts show a curved light bar. Do I have to purchase this light bar? or do they make lights for the straight one? If so, do the passing lights come with the turn signals that hang underneath or am I suppose to do something with the stock ones. I just want to buy something and can't figure this out. It looks to me like the turn signals that are on the ends now would come out and the passing lights would go in there place, but I don't know. Really need help in buying. I just bought kromewerks slip on and want to buy all the lights, including Led for the rear, and possibly engine lights and want to have everything so I can do all the electric at one time with taking the saddlebags and gas tank off. I appreciate any help. Thanks Walt:bang head:
relic Posted October 14, 2009 #2 Posted October 14, 2009 The curved light bar accomodates the new driving lights and you use your existing signals.They attach below the driving lights. The straight bar you have now is removed.I have attached a picture of mine that are yamaha's driving lights and the bar came with them as a set.
wakers Posted October 14, 2009 Author #3 Posted October 14, 2009 Thanks John, where did you buy your set and is one set better than another?
tsigwing Posted October 14, 2009 #4 Posted October 14, 2009 Thanks John, where did you buy your set and is one set better than another? I attached my (non-factory) lights to my turn signal bar using a 1" (?) chrome clamp.
FreezyRider Posted October 14, 2009 #5 Posted October 14, 2009 I attached my (non-factory) lights to my turn signal bar using a 1" (?) chrome clamp. Surely you know the rules by now.....Where are the PICTURES???
Dave77459 Posted October 14, 2009 #6 Posted October 14, 2009 I am ordering items for my winter projects and need some help. I have read the threads involving passing lamps and understand how to install, but here is where my dumbness comes in. I have an 06 beautiful black tour deluxe with a straight light bar which the turn signals connect horizontal at the ends. I want to add passing lamps but am confused. Every site I look at to order the lights and mounts show a curved light bar. Do I have to purchase this light bar? or do they make lights for the straight one? If so, do the passing lights come with the turn signals that hang underneath or am I suppose to do something with the stock ones. I just want to buy something and can't figure this out. It looks to me like the turn signals that are on the ends now would come out and the passing lights would go in there place, but I don't know. Really need help in buying. I just bought kromewerks slip on and want to buy all the lights, including Led for the rear, and possibly engine lights and want to have everything so I can do all the electric at one time with taking the saddlebags and gas tank off. I appreciate any help. Thanks Walt:bang head: First of all, great choice of bike! The '06 Midnight Tour Deluxe is the sexiest. So, if it wasn't clear, what is done is that the stock turn signals end up hanging below the passing lamps on a new curved bar. (Before/After photos below) You buy the mounting bar (P/N STR-1D635-40-00) and then choose either sealed beam (STR-4NK35-10-00) or halogen (STR-4NK35-10-01) lamps. I bought the halogen and I am very happy. I was not so happy about the installation by the dealer, which turned the lamps off when I turned on highbeams. Lots of advice here on this site about how to do it properly using a relay. I'd snoop around until I understand. (Took me a while!) If I might suggest projects for you, I would first install an auxiliary fuse box under the seat. Then you can branch out to the front and back, and have a solid place to grab energy from. Good luck, and have fun! Dave http://farm4.static.flickr.com/3079/2770920679_c54131da7d.jpg http://farm4.static.flickr.com/3066/2831465795_181a9626a7.jpg
wakers Posted October 14, 2009 Author #7 Posted October 14, 2009 Thanks Dave and everyone else. Now I understand. I am going to run a fuse box and relay so my lights are ignition controlled. I have read horror stories about dealer installation and am scared to death. I will attempt this myself. Will have plenty of time with the winter months coming. Thanks again and Hope I can return the favor. When I start the projects I will photograph for step by step instructions.
Bugsplat Posted October 14, 2009 #8 Posted October 14, 2009 If you do any amount of night riding change out the stock 30W sealed beam bulbs ( almost worthless)for Wagner #7600 bulbs (60,000cp) from NAPA. They make a tremendous difference in visibility in the dark.
wakers Posted October 14, 2009 Author #9 Posted October 14, 2009 Thanks, that was the next question I was going to bother everyone with. I know I just turned 51 but I don't remember it being so hard to see at night. I was just reading on what kind of light bulb to replace the stock one with. Was looking at a PIAA at 44.00 until you gave me this advise. Thanks
eusa1 Posted October 14, 2009 #10 Posted October 14, 2009 First of all, great choice of bike! The '06 Midnight Tour Deluxe is the sexiest. So, if it wasn't clear, what is done is that the stock turn signals end up hanging below the passing lamps on a new curved bar. (Before/After photos below) You buy the mounting bar (P/N STR-1D635-40-00) and then choose either sealed beam (STR-4NK35-10-00) or halogen (STR-4NK35-10-01) lamps. I bought the halogen and I am very happy. I was not so happy about the installation by the dealer, which turned the lamps off when I turned on highbeams. Lots of advice here on this site about how to do it properly using a relay. I'd snoop around until I understand. (Took me a while!) If I might suggest projects for you, I would first install an auxiliary fuse box under the seat. Then you can branch out to the front and back, and have a solid place to grab energy from. Good luck, and have fun! Dave http://farm4.static.flickr.com/3079/2770920679_c54131da7d.jpg http://farm4.static.flickr.com/3066/2831465795_181a9626a7.jpg if i follow your instructions to the letter, will the seat of my motorcycle fill up with such a pretty young lady?? someone was gunna say it.....:rasberry:mike
Bugsplat Posted October 15, 2009 #11 Posted October 15, 2009 Before someone ask's the question, the Wagner #7600 sealed beam bulbs are only 37.5 watts compared to the stock 30watt bulbs. At 60,000cp they really do the job at night. You will want to aim them a little lower than normal because they are sooooooooo bright.
Dave77459 Posted October 15, 2009 #12 Posted October 15, 2009 if i follow your instructions to the letter, will the seat of my motorcycle fill up with such a pretty young lady?? someone was gunna say it.....:rasberry:mike Thanks! That's my daughter and she gets her good looks from me. Dave
naturbar Posted October 16, 2009 #13 Posted October 16, 2009 ordered my lamps and light bar yesterday....will post some pics when they're installed.
jemorrisonjr Posted October 16, 2009 #14 Posted October 16, 2009 I really wanted to be see and be seen at night, I installed the light bar and Motolights to my bike....can light up the road a lot
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now