Lighting up my Venture

[Brown Angel]

More pics and progress.

Pic 1 The wire connections under the seat.

Pic 2 The dressed out wiring under the seat.

Pic 3&4 Light bar installed on Trunk with running lights on.

Pic 5 The wiring in the trunk. The red rectangle is the diode board.

Pic 6 The floor back in the trunk.

Pic 7 Running lights from 50 yards

Pic 8 Running lights

Pic 9 Brake lights

Pic 10 Brake lights from 50 yards

 

The reflector backing was reinstalled using double sided foam tape 1/32 thick, with five 1.5 x 2 pieces and the original 3 screws. I have not glued the reflector back on since the backing was rather flimsy once the reflector was removed so I have to have it mounted to the trunk to hold proper shape for gluing.

 

I have not yet reinstalled the reflectors. I am waiting to see if I want to increase the Turn signal portion to be more visible from the back. Increasing the turn signal area will decrease the brake light area. I may need to get someone to follow me to see what it looks like on the road.

Totally am going to do this ! Love it.. Thanks:clap2:

[Flyinfool]

Let me know before you start, there are new LEDs coming out all of the time, there are better ones out now than what I used.