Ponch Posted October 4, 2009 Author #51 Posted October 4, 2009 From your 1st posting, is the middle pic of the polished plate? Guessing the 5th pic is Don's? Looks like from the colors they are the same '99 color as what I have. The middle three pics are polished Aluminum. Don's is the fifth. He painted it to match his dash. Good job, too. I would really like to have them. I too would prefer a tach in the package but it is not vital. Pretty dumb when it comes to this stuff but if the instructions are good I will give it a try. It's really not that hard. I've been told the instructions are pretty clear. If after receiving the kit, you are unsure about it, you can call me with questions.
Sleeperhawk Posted October 4, 2009 #52 Posted October 4, 2009 i most likely missed the post in all these posts about the gauges. I like the Sunpro black background, but I want the Chrome ring. All I find is the black ring, hate to buy both sets to swap rings. Personally the white facing would be too bright (night time riding) and take a way from the speedo, unless there is a dimmer switch on the gauges.
GuthDaddy17 Posted October 4, 2009 #53 Posted October 4, 2009 No dimmer switch but night time riding is not a problem as the gauges are not too bright. I love these gauges and Ponch's plate and brackets are awsome. I love living in Texas, not only do we get to ride year around but we get to live near Ponch and V7Goose!
Shot Posted October 4, 2009 #54 Posted October 4, 2009 I like the gauges but I'm questioning myself if I am capable of hooking them up. Also, I use my mp3 and I sure don't want to screw up the plug-in. All of that said, put me in for a set; every time I look at the cassette I think of taking it out and just adding storage or something. Thanks
Freebird Posted October 4, 2009 #55 Posted October 4, 2009 You don't have to lose the MP3 plugin. It has a cable with a 1/8" stereo jack inside the fairing. Just unplug it from the cassette, get a short extension cable at radio shack, and run it out so that you can still use it. There is a tech article on it here: [ame=http://www.venturerider.org/forum/showthread.php?t=3905]Installing an Aux line splitter - VentureRider.Org[/ame] Just use an extension cable instead of the splitter.
gunkylump Posted October 4, 2009 #56 Posted October 4, 2009 Watch yer mail next week. Would this work out? Size is 1 7/8 http://www.denniskirk.com/jsp/produc...fCatId=&mmyId= I have the Drag Specialties mini tach. Unfortunately, it measures about 2" at the O.D. of the bezel. That would work but it would overhang the top and bottom of the plate. Also, all three 1 1/2" gauges butt up against each other and just fit within the length of the mount plate. So, you would have a tough time fitting the tach in with two other gauges. June would work, the first half of September is still August to me. If I were headed south from Canuck land, I would choose early June, the end of September or October. This is about a three hour job by yourself, two with friends, eight with lots of friends. Googling shows me about a 1400 mile trip on the most direct route.....probably a 3 day ride for us. We'll see how the vacations get set up next year, and see what comes up. Don't be too surprised if we invade your space for a week.....Texas should be big enough for all of us randy:witch_brew:
Sleeperhawk Posted October 4, 2009 #57 Posted October 4, 2009 (edited) Found these, now I wonder why these would not work. http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=65210 Also, here is the manual for the gauges http://www.harborfreight.com/manuals/65000-65999/65210.pdf Edited October 4, 2009 by Sleeperhawk
jlh3rd Posted October 4, 2009 #59 Posted October 4, 2009 shot if you look at post #12.....you will see what i did with my mp3 jack.....
Ponch Posted October 4, 2009 Author #60 Posted October 4, 2009 Found these, now I wonder why these would not work. http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=65210 Also, here is the manual for the gauges http://www.harborfreight.com/manuals/65000-65999/65210.pdf Yup, they'll work. I don't think HF offers a volt meter, though. All I found was the amp/water/oil setup. I prefer that setup myself as I already have a digital volt meter. Randy, come on down, We'll leave the light on for ya.
Sleeperhawk Posted October 4, 2009 #61 Posted October 4, 2009 Yup, they'll work. I don't think HF offers a volt meter, though. All I found was the amp/water/oil setup. I prefer that setup myself as I already have a digital volt meter. Randy, come on down, We'll leave the light on for ya. I found this set with the volt gauge, but a little bit pricey http://www.equus.com/product_info.php?product_id=6100&category_id=100_120
Ponch Posted October 4, 2009 Author #62 Posted October 4, 2009 They are very good gauges from what I hear. They mount with a ring nut instead of a "U" clamp that the SunPro uses. They will still work with the gauge plate, but the holes in the dash have to be opened a little more and the brackets have to be attached via sheet metal screws instead of mounting to the studs on the back of the SunPro's. I haven't installed the Equus setup yet, but Freebird and Rick Butler have and both said it wasn't hard to figure out.
Freebird Posted October 5, 2009 #63 Posted October 5, 2009 I found this set with the volt gauge, but a little bit pricey http://www.equus.com/product_info.php?product_id=6100&category_id=100_120 Here they are about $20.00 cheaper. [ame=http://www.amazon.com/Equus-6100-Black-Triple-Gauge/dp/B000EW0KX6/ref=sr_1_8?ie=UTF8&s=automotive&qid=1254737431&sr=1-8]Amazon.com: Equus 6100 Black Volt Triple Gauge Kit - Measures 1 1/2-Inches: Automotive[/ame]
Ponch Posted October 5, 2009 Author #64 Posted October 5, 2009 Personally the white facing would be too bright (night time riding) and take a way from the speedo, unless there is a dimmer switch on the gauges. The lighting on the white face gauges is not that bright. If it is, you can install a small resistor in the light circuit. My tach light is blue and BRIGHT. I will install a resistor in that circuit.
hale374 Posted October 5, 2009 #65 Posted October 5, 2009 Can Anyone in a 200 – 250 Mile radius from Va.Beach, help me with the installation of these gauges.? I live in Culpeper and will be getting a set. I've never done it before, but the instructions from Goose don't sound to bad. I will be trying it. If I feel comfortable with it, I'll let you know and you can come on up.
Color01 Posted October 5, 2009 #66 Posted October 5, 2009 I live in Culpeper and will be getting a set. I've never done it before, but the instructions from Goose don't sound to bad. I will be trying it. If I feel comfortable with it, I'll let you know and you can come on up. Culpeper is not to far.. .. I picked a horse up in Culpeper..Not to long ago. Please Let me know, when you installed you gauges. Thanks
MidlifeVenture Posted October 9, 2009 #67 Posted October 9, 2009 Scott , when you find a 1.5 dia tach , PLEASE let all of use know! I would rather have that in the spot of the volt meter. (been looking for one that size for a long time now) Jeff something like this might be neat http://www.motogadget.com/en/msm.html I am not sure if it would work but they show it on a bike
Art708 Posted October 10, 2009 #68 Posted October 10, 2009 I would be interested in the full package also with the stainless,they look great,i am in the great white north also. I would be very interested in the whole package also. They look fantastic...great job!
Ponch Posted October 21, 2009 Author #69 Posted October 21, 2009 For those of you waiting on me to get off my a$$ and make some plates, I'm working on it. My machine shop has stalled me for four weeks now, so I have been hand machining a few sets at a time to try to make a little progress. I will try to get a dozen or so done this weekend. Also, I have a water jet fabricator who will make them for me in the future. As soon as I get a little capital, I will place an order with him. I hope this doesn't put anyone off. I should never have started this thread before I had a stock on hand. Sorry.
1 - UP Posted October 22, 2009 #70 Posted October 22, 2009 Ponch, Don't be sorry, we appreciate what you are doing. Sure helps us from having a "trial and error" day of doing it ourselves. Ken:thumbsup2:
Freebird Posted October 22, 2009 #71 Posted October 22, 2009 It will be interesting to see how the Autometer gauges work out. I like the look of the gauges but didn't want to give up the three gauge setup. The Equus gauges I ended up going with are very nice also. It just seems that even with two gauges it is going to be a very tight fit even vertically.
Hummingbird Posted October 22, 2009 #72 Posted October 22, 2009 Ponch - I failed to report that I got my set the other day ( sorry about that ) and I'm still hesitant about jumping in with the install. The instructions are more than adequate and after reading thru them a couple times, they do make sense to me. I guess I'll just have to make time to tackle it. I'll bet you can understand my apprehension when it took me 4 days to find a little nail in my bike tire.
Tom Posted October 22, 2009 #73 Posted October 22, 2009 Ponch - I failed to report that I got my set the other day ( sorry about that ) and I'm still hesitant about jumping in with the install. The instructions are more than adequate and after reading thru them a couple times, they do make sense to me. I guess I'll just have to make time to tackle it. I'll bet you can understand my apprehension when it took me 4 days to find a little nail in my bike tire. We have lots of room down here in Texas for you all to stay..The cold may hold you up but if you want to put it on a trailer we can get em installed and have a great ride thru our hill country..Just a thought!
Ponch Posted October 22, 2009 Author #74 Posted October 22, 2009 It will be interesting to see how the Autometer gauges work out. I like the look of the gauges but didn't want to give up the three gauge setup. The Equus gauges I ended up going with are very nice also. It just seems that even with two gauges it is going to be a very tight fit even vertically. I think there is room. If Jarrex or anyone else sends me a two gauge set, I'll make a plate and try the install on my bike. If it don't work, I'll buy the gauges from the sender. Ponch - I failed to report that I got my set the other day ( sorry about that ) and I'm still hesitant about jumping in with the install. Dick, If you don't get it done before then, I'll do it for you at Freebird's Maint. Day. We have lots of room down here in Texas for you all to stay..The cold may hold you up but if you want to put it on a trailer we can get em installed and have a great ride thru our hill country..Just a thought! I second that. Come on down, we'll do it here. http://t1.gstatic.com/images?q=tbn:9h99sxAtkjcItM:http://upload.wikimedia.org/wikipedia/commons/thumb/f/f7/Flag_of_Texas.svg/800px-Flag_of_Texas.svg.png
jarrejx Posted October 24, 2009 #75 Posted October 24, 2009 I think there is room. If Jarrex or anyone else sends me a two gauge set, I'll make a plate and try the install on my bike. If it don't work, I'll buy the gauges from the sender. http://t1.gstatic.com/images?q=tbn:9h99sxAtkjcItM:http://upload.wikimedia.org/wikipedia/commons/thumb/f/f7/Flag_of_Texas.svg/800px-Flag_of_Texas.svg.png Ponch, PM sent, but I forgot to mention that there should be no need for you to buy the gauges, since I assume I could still use them in the area near the speakers, if they will not fit in the cassette deck opening. Jerry
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now