Whitlow Posted September 23, 2009 #1 Posted September 23, 2009 I've had these on my other bikes and wanted to know if someone could tell me which will work on my 03 RSV? Thanks
JerryT Posted September 23, 2009 #2 Posted September 23, 2009 Assuming you mean to get backoff lights, I'm traveling so don't have the exact part number. On my 09RSV I used the Kuryakyn one that is made for the Roadstar with the old style taillight( 03 and before I think). Not sure why, but Kuryakyn doesn't show this working for the RSV, but it was a direct plug and play fit for mine. Works great, plugs inline under the seat. I changed the taillight and rear turn lights to led. and makes unbleavabe difference for rear lighting. Someone will chime in on best place to get led taillight (in other words, I forget) but they sell a 100 light led board that is very bright. I will be home Friday if you still need part number, just let me know.
Jethroish Posted September 24, 2009 #3 Posted September 24, 2009 This is what I put on my 07. http://www.signaldynamics.com/products/Modules/tristarxp.asp I did not install the load equalizer, but I need to. My lights blink fast. I tried installing the equalizer, but I could not get it to work right. I will say I may have had it hooked to a wrong wire. Just have not retried. I also swapped out my clear lenses on the turn signals to red lenses.
Whitlow Posted September 24, 2009 Author #5 Posted September 24, 2009 What part number everyone I see says for 04-up Venture. Thanks
JerryT Posted September 24, 2009 #6 Posted September 24, 2009 Got back early. The led tail light I used was Part # GEN-100-1157YAM which is the Genesis 100 Light board from www.customdynamics.com . I think the brightest board I have seen. I used a different led turn bulbs, but custom also has nice ones. The Kuryakyn #4613 RTB Controller. Kuryakyn shows this for 1600 Roadstar, but it works fine on my 09 RSV and is a true plug / play, ie comes with end plugs so no wiring. Not sure if plugs are the same on yours, but I think so. You might check with your local dealer to see if he has one you can look at, pull your drivers seat off and check to see if is a direct plug in. If so it is much easier then having to splic in wiring on the other ones. Comes with equalizers so everything blinks at right speed. I tried to post picture of back of mine, but really doesn't show how well it lights up. Hope this helps and good luck.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now